PART NEEDED

Post Reply
Mick Conde
Posts: 55
Joined: Wed Feb 14, 2001 8:34 am

PART NEEDED

Post by Mick Conde » Mon Nov 26, 2001 12:17 pm

Faithfull- I am looking for a medallion for my PA that goes in the center of the spare tire lock. It is the same as an ABC. If anyone has a spare for sale, please let me know. I would also be interested in a pair of #160 Lucas mirrors as well. THANKS Mick Keystone Classic Cars LTD _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp

Mick Conde
Posts: 55
Joined: Wed Feb 14, 2001 8:34 am

part needed

Post by Mick Conde » Sun Jan 31, 2010 5:35 am

Good morning group - I'm looking for hens teeth again. Need a 5" round RH (drivers side) NOS Lucas mirror for a friend, thru 1965 would be OK. If anyone happens to have one, please contact me off-group with the details. rgds....................Mick [Non-text portions of this message have been removed]

Ben Cordsen
Posts: 3
Joined: Wed Mar 29, 2006 5:12 pm

part needed

Post by Ben Cordsen » Wed Apr 28, 2010 6:24 pm

To all, I am in need of two rectangular rubber ferrules for the headlamp to radiator shell mounting. The Moss Motors part number is 281-018. It is a simple matter to order from Moss but I only need this item, it is below minimum plus shipping is costly for one item only. Anyone have 2 of these excess to their needs? Ben Cordsen _________________________________________________________________ Hotmail is redefining busy with tools for the New Busy. Get more from your inbox. http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_2 [Non-text portions of this message have been removed]

Jim Buell
Posts: 30
Joined: Tue Apr 27, 2010 10:56 am

Part needed

Post by Jim Buell » Wed Sep 08, 2010 11:03 am

Hi Group- I am in need of the RH and LH front shock mounting bracket and pin. This is the bracket that fits under the front spring. Thanks for your help. Jim Buell Blanchard, ID TC9806 [Non-text portions of this message have been removed]

Peter Cole
Posts: 72
Joined: Thu Nov 28, 2002 1:28 pm

Re: Part needed

Post by Peter Cole » Wed Sep 08, 2010 1:00 pm

Jim, The pin is easy to make, I'll send you the dimensions if you like. Peter.
On 8 September 2010 19:03, Jim Buell gmparcr@lambgroupinc.net> wrote: > > > Hi Group- > > I am in need of the RH and LH front shock mounting bracket and pin. This is > the bracket that fits under the front spring. Thanks for your help. > > Jim Buell > > Blanchard, ID > > TC9806 > > [Non-text portions of this message have been removed] > > > [Non-text portions of this message have been removed]

Frank Graham
Posts: 39
Joined: Sat Aug 09, 2003 5:12 pm

Re: Part needed

Post by Frank Graham » Wed Sep 08, 2010 6:39 pm

Jim, Having just overhauled the springs for my Q-TA I think what you want are the upper plates of the front spring that the shock link attaches to. The shock link mounts to the upper plate at the front and the lower plate at the rear. Regards, -- Frank frankgraham@msn.com -- [Non-text portions of this message have been removed]

TimM
Posts: 1
Joined: Sat May 15, 2010 7:12 am

Part Needed

Post by TimM » Wed Sep 15, 2010 6:09 am

Dear Listers - While doing some trial fitting of body pieces prior to painting we discovered that we have two RH front wing supports for TC2278 but no LH support. Does anyone have a LH support that we can beg, borrow, steal or buy? Moss has them - $140 - but at this point we're on the cheap. Please reply off-list or call 214-557-9341, Thanks in advance, Tim Moorhead Dallas, TX

jhtschmitt
Posts: 1
Joined: Sun Jan 15, 2006 6:05 pm

Part Needed

Post by jhtschmitt » Wed Aug 01, 2012 10:23 am

MG Folks, I am looking for an original right side door handle. I would appreciate any help.Thanks. Jane Schmitt TCEXU 8237

Jim Buell
Posts: 30
Joined: Tue Apr 27, 2010 10:56 am

Part needed

Post by Jim Buell » Fri Jan 31, 2014 1:45 pm

Hi Group-

 

I am in need of (1) oil filter strap (ref Moss 435-310)  – which is a pair, but I only need one.  If you have one that is excess to your needs please let me know. 

 

Thanks

 

Jim Buell

1949 TC

1974 BGT (Basket Case)

Blanchard, ID  83804-9546

(208) 771-0087

gmparcr@lambgroupinc.net

 


Jim Buell
Posts: 30
Joined: Tue Apr 27, 2010 10:56 am

Re: Part needed

Post by Jim Buell » Fri Jan 31, 2014 4:40 pm

Attachments :
    [*][url=file:///C:\Users\Steve\AppData\Local\PG Offline 4\Attachments\\DSCN0623.JPG]DSCN0623.JPG[/url]
Added info re: the filter strap needed. Apparently they straps are handed. I do not know which side I need, but I have attached a picture of the piece I have .Jim

 

[b]From:[/b] Robert Gressard [mailto:robert.gressard@att.net] [b]Sent:[/b] Friday, January 31, 2014 3:27 PM [b]To:[/b] Jim Buell [b]Subject:[/b] Re: [mg-tabc] Part needed

 

Which side? They are different. Bob

 

[b]From:[/b] Jim Buell gmparcr@lambgroupinc.net> [b]To:[/b] mg-tabc@yahoogroups.com [b]Sent:[/b] Friday, January 31, 2014 4:45 PM [b]Subject:[/b] [mg-tabc] Part needed

 

Hi Group-

 

I am in need of (1) oil filter strap (ref Moss 435-310)   which is a pair, but I only need one.  If you have one that is excess to your needs please let me know. 

 

Thanks

 

Jim Buell

1949 TC

1974 BGT (Basket Case)

Blanchard, ID  83804-9546

(208) 771-0087

gmparcr@lambgroupinc.net

 

No virus found in this message. Checked by AVG - [u]www.avg.com[/u] Version: 2014.0.4259 / Virus Database: 3684/7043 - Release Date: 01/29/14

No virus found in this message. Checked by AVG - [u]www.avg.com[/u] Version: 2014.0.4259 / Virus Database: 3684/7048 - Release Date: 01/31/14


Post Reply

Who is online

Users browsing this forum: No registered users and 15 guests