Re: SAFETY FAST

Frank O_ The Mountain
Posts: 233
Joined: Thu Dec 25, 2008 3:02 pm

Safety Fast

Post by Frank O_ The Mountain » Thu Mar 16, 2000 4:01 pm

I've just received my issue of SF....attached was a suppliers guide and on
the back of that was a picture, presumably in the Abingdon works, show an
engine apparently being put in backward of a chassis with 19" wire wheels!!!
and they were White Side Walls!!!!

Can anyone shed some light on this photograph??

Terry

Keith and Maggie Black
Posts: 10
Joined: Sat Nov 27, 1999 5:14 pm

Re: Safety Fast

Post by Keith and Maggie Black » Fri Mar 17, 2000 5:09 am

Terry
More than likely this was the earliest picture of the SAAB
prototype.....................Keith

PADDY WILLMER
Posts: 24
Joined: Sun Nov 28, 1999 10:20 am

safety fast

Post by PADDY WILLMER » Sat Mar 18, 2000 2:57 pm

You silly boys! The photo on the back of the trade directory is of an MGA. The engine is being fed in , gearbox first, through the ramp plate. It is a B series, not an XPAG. You thought it was Y-Type, did you not, Terry? Or perhaps you, like me , are too old and going blind! What we both need is a good blast in a T-Type! Paddy.

Frank O_ The Mountain
Posts: 233
Joined: Thu Dec 25, 2008 3:02 pm

Re: safety fast

Post by Frank O_ The Mountain » Sun Mar 19, 2000 9:21 pm

In a message dated 3/18/00 2:58:39 PM Pacific Standard Time,
paddy@apwillmer.freeserve.co.uk writes:

>
[/quote]I guess you are right Paddy, time to get the old TA out and blow out the
cobwebs.....I didn't that Abingdon supplied anything with WW tires. and they
sure looks bigger than 15"
Terry

Dean Jensen
Posts: 122
Joined: Wed Dec 01, 1999 2:36 pm

Safety Fast

Post by Dean Jensen » Fri Dec 01, 2000 6:00 am

to members of the MGCC, I have not received a copy of Safety Fast for some time, is anyone else having the same problem. Dean

Bob Grunau
Posts: 149
Joined: Wed Oct 29, 2003 10:26 am

Re: Safety Fast

Post by Bob Grunau » Fri Dec 01, 2000 6:57 am

Hi Dean, I just received my copy dated 11 November 2000 a couple of days ago. Bob to members of the MGCC, I have not received a copy of Safety Fast for some time, is anyone else having the same problem. Dean

HarRyoichi
Posts: 0
Joined: Mon Nov 20, 2000 11:55 am

Re: Safety Fast

Post by HarRyoichi » Fri Dec 01, 2000 8:15 am


HarRyoichi
Posts: 0
Joined: Mon Nov 20, 2000 11:55 am

Re: Safety Fast

Post by HarRyoichi » Fri Dec 01, 2000 8:28 am


HarRyoichi
Posts: 0
Joined: Mon Nov 20, 2000 11:55 am

Fw: [mg-tabc] Safety Fast

Post by HarRyoichi » Fri Dec 01, 2000 8:38 am


Joe Gates
Posts: 52
Joined: Tue Oct 23, 2001 12:52 pm

SAFETY FAST

Post by Joe Gates » Tue Jun 03, 2003 3:09 pm

A bit off the T-ABC mark, but the May 1963 edition of Safety Fast, in the series "Portrait Gallery", detailed a brief 2 page history and technical specifications for the MGTF. If anyone has this edition, I shall be grateful if you can scan the article and email it to me; alternatively contact me offline and I will give you a number to which it can be faxed.

Many thanks in anticipation

Joe Gates
TC 8675
Johannesburg, S Africa


[Non-text portions of this message have been removed]

Post Reply

Who is online

Users browsing this forum: No registered users and 20 guests