Re: TC Carb Mounting Bolts

[Carl Fritz]

Larry,
When you determine the size and thread pitch of these bolts, I suggest
that you get STUDS of the same size and use them with nuts, rather than
bolts. You'll be amazed how much easier this makes it to install your carbs
on the manifold!!
Regards,
Carl Fritz
TC6756
VA 2009 Saloon
Gainesville, Florida

[ian thomson]

And don't have the studs too long either!

Ian Thomson


--- Carl Fritz wrote:

>
> Larry,
> When you determine the size and thread pitch of
> these bolts, I suggest
> that you get STUDS of the same size and use them
> with nuts, rather than
> bolts. You'll be amazed how much easier this makes
> it to install your carbs
> on the manifold!!
> Regards,
> Carl Fritz
> TC6756
> VA 2009 Saloon
> Gainesville, Florida
>
>
>
>
>
> Yahoo! Groups Links
>
>
> mg-tabc-unsubscribe@yahoogroups.com
>
>
>
>
>

___________________________________________________________
How much free photo storage do you get? Store your holiday
snaps for FREE with Yahoo! Photos http://uk.photos.yahoo.com