Re: Master cylinder - Follow up

[rick storms]

You can check out Sierra Specialty Automotive at: http://www.brakecylinder.com/index.htm And according to their web site they do master cylinders, but I would call to make sure they do the TC's. Rick Storms -----Original Message----- From: Rick Storms [mailto:TCStormer@comcast.net] Sent: Thursday, July 21, 2005 4:50 PM To: 'Mick Conde'; 'davjak@aol.com' Cc: 'MG-TABC@yahoogroups.com' Subject: RE: [mg-tabc] Master cylinder I don't know if they will do the Master cylinder, but I just got my wheel cylinders done from Sierra Specialty Automotive - 3494 Chandler Road, Quincy, CA 95971 - 530-283-1886. They did a magnificent job, the cylinders look like new. Oh, they charged $200 for all four. That included all taxes and return shipping. Rick Storms TC's 6776, 8230 -----Original Message----- From: mg-tabc@yahoogroups.com [mailto:mg-tabc@yahoogroups.com] On Behalf Of Mick Conde Sent: Wednesday, July 20, 2005 12:11 PM To: davjak@aol.com Cc: MG-TABC@yahoogroups.com Subject: Re: [mg-tabc] Master cylinder Dave - I agree. I quite using White Post and Apple years ago for the same reasons. I have recently heard of a shop on the west coast near the LA,CA area if I remember correctly that sleeves with 312/316 stainless steel. Anyone know them ? mick davjak@aol.com wrote:If you do use White Post, inspect the parts carefully when you get them back. My hydraulic components were contaminated with residual brass machining byproducts some were keeping the bleeders from seating. Last time I used them there were no problems; possibly mine were done on Friday? They also want to do the full job. Others will complete the machining and let you rebuild them yourself for additional savings-the route I will take next time. Make sure you mark your parts! I got back some ones' leaking master (reservoir) cylinder along with assorted claw hammer/vise grip/ file marks! Dave TC 5228, TC 5041 [Non-text portions of this message have been removed] Yahoo! Groups Links --------------------------------- Start your day with Yahoo! - make it your home page [Non-text portions of this message have been removed] Yahoo! Groups Links

[Gene Gillam]

Rick said:

>And according to their web site they do master cylinders, but I would

call to make sure they do the TC's.