Parts 4 Sale

Post Reply
joecurto@aol.com
Posts: 313
Joined: Wed Jul 19, 2000 3:42 am

Parts 4 Sale

Post by joecurto@aol.com » Thu Feb 10, 2005 2:25 pm

Anyone interested in a MGTA Inlet manifold. contact me off list Joe curto [Non-text portions of this message have been removed]

joecurto@aol.com
Posts: 313
Joined: Wed Jul 19, 2000 3:42 am

Parts 4 Sale

Post by joecurto@aol.com » Fri Nov 25, 2005 10:02 am

Folks I have some pieces of a 1950s Riley 2.5 Litre transmission I wish to sell . It has no T series application, I have a disassembled box missing the 3rd motion shaft BUT I have a beautiful cluster gear, main case 1st motion shaft and some other pieces. This box is a giant version of a TC box and was also used in the Healey Silverstone. Perhaps if some of our members in England or Australia know of a place I could peddle these items it would be appreciated and you can contact me off list. Joe Curto [Non-text portions of this message have been removed]

joecurto@aol.com
Posts: 313
Joined: Wed Jul 19, 2000 3:42 am

Parts 4 sale

Post by joecurto@aol.com » Sat Sep 01, 2007 10:45 am

I have an MGTC dipstick used original I have one of those cast aluminium replacement oil filter cannisters for TC/ early TD which Moss used to sell MGTC cylinder head used Repro cast alloy valve cover missing the cap T type crankshaft .050/.050 with bearings magnafluxed and cut fits TB,C,D,F If any interest contact me off list Joe ________________________________________________________________________ Email and AIM finally together. You've gotta check out free AOL Mail! - http://mail.aol.com [Non-text portions of this message have been removed]

Peter Lund
Posts: 10
Joined: Sat Sep 01, 2007 8:16 pm

Re: Parts 4 sale

Post by Peter Lund » Sat Sep 01, 2007 9:16 pm

Is there an engine number stamped on the TC dispstick?? --- joecurto@aol.com wrote:
> I have an MGTC dipstick used original > > I have one of those cast aluminium replacement oil > filter cannisters for TC/ early TD which Moss used > to sell > > MGTC cylinder head used > Repro cast alloy valve cover missing the cap > > > T type crankshaft .050/.050 with bearings > magnafluxed and cut fits TB,C,D,F > > > If any interest contact me off list > > Joe >
________________________________________________________________________
> Email and AIM finally together. You've gotta check > out free AOL Mail! - http://mail.aol.com > > > [Non-text portions of this message have been > removed] > >
____________________________________________________________________________________ Sick sense of humor? Visit Yahoo! TV's Comedy with an Edge to see what's on, when. http://tv.yahoo.com/collections/222

joecurto@aol.com
Posts: 313
Joined: Wed Jul 19, 2000 3:42 am

Parts 4 sale

Post by joecurto@aol.com » Tue Oct 09, 2007 5:38 am

I have a T ( B,C,D,& F) series crank magnafluxed and cut and polished size is .050/.050 I have new bearings if any interest contact me off list Joe curto ________________________________________________________________________ Email and AIM finally together. You've gotta check out free AOL Mail! - http://mail.aol.com [Non-text portions of this message have been removed]

joecurto@aol.com
Posts: 313
Joined: Wed Jul 19, 2000 3:42 am

Parts 4 Sale

Post by joecurto@aol.com » Mon Mar 31, 2008 7:01 am

Fellows a pal of mine Dave Blackwell in New York has a low milage MGTC gearbox for sale He also has a TC/TD bananna head for sale, has new seats, bronze guides he says it is ready to go. He can be contacted through me via E mail or call him @ 631 576-9345 East coast time

Joe Curto
Posts: 71
Joined: Sun Apr 29, 2012 7:03 am

Parts 4 sale

Post by Joe Curto » Tue Dec 18, 2012 8:10 am

Fellows I have 4 New cylinder liners TRW SL-604F  2 7/8 bore pretty thick wall, possible use was to convert an XPAG engine to 1500 CC I will take 125.00 for the 4,plus shipping contact me off list
 
Joe
 

Norman Golm
Posts: 3
Joined: Fri May 06, 2011 4:40 am

Re: Parts 4 sale

Post by Norman Golm » Tue Dec 18, 2012 8:52 am

I have a set of BMC Pistons AEF 119. They measure 71.45 mm at the top land. They say on the top “to suit STD Bore” on the top. The pistons are equipped with rings and piston pins. They came with Skip Olds TC 7610. The pistons are in their original box. They are still in the original wrappers. They don’t look like they have never been installed. I would like $175.00 for the set

 

[b]  [/b]

[b]  [/b]

[b]Norman C Golm[/b]

Golm and Associates LLC

 

12158 N Foxview Dr

Northport  MI 49670

231 386 5857

Cell 231 432 0157

ncgolm@gmail.com

 


Joe Curto
Posts: 71
Joined: Sun Apr 29, 2012 7:03 am

parts 4 sale

Post by Joe Curto » Tue Jun 24, 2014 6:46 am

I have a few items I wish to sell Shorrock Super charger for MG T type used mostly complete restorable File folder box of TSO from the 1970's to 2000 + Headlamp reflectors Lucas 770 ( XK Jag type) ( flat glass tri-pod 8 inch) these are in restorable condition they are complete with proper bulb holders Contact me off list for more info and prices Joe Curto 718-762-7878 www.joecurto.com

Post Reply

Who is online

Users browsing this forum: No registered users and 13 guests