I am in the midst of cleaning and refurbishing my tac reduction box. Some idiot (me) loaded it with chassis grease and it (thankfully) managed to work itself off the generator; else I suspect the would be nice shiny nubs where the gear teeth once meshed.
My stupidity aside, does anyone have a recommendation for the “gear oil” the Book notes? And any other thoughts?
Many Thanks,
_Peter
TC0604
As there is no gasket on that thing , I think oil will cover the engine bay Joe Curto 718-762-7878 www.joecurto.com -----Original Message----- From: mgtc@comcast.net [mg-tabc] mg-tabc-noreply@yahoogroups.com> To: mg-tabc mg-tabc@yahoogroups.com> Sent: Fri, Apr 27, 2018 3:00 pm Subject: [mg-tabc] Tach Reduction box I am in the midst of cleaning and refurbishing my tac reduction box. Some idiot (me) loaded it with chassis grease and it (thankfully) managed to work itself off the generator; else I suspect the would be nice shiny nubs where the gear teeth once meshed. My stupidity aside, does anyone have a recommendation for the gear oil the Book notes? And any other thoughts? Many Thanks, _Peter TC0604On Apr 28, 2018, at 10:48 AM, Joe Curto joecurto@aol.com> wrote:
On Apr 28, 2018, at 10:48 AM, Joe Curto joecurto@aol.com> wrote:
As there is no gasket on that thing , I think oil will cover the engine bay Joe Curto 718-762-7878 www.joecurto.com -----Original Message----- From: mgtc@comcast.net [mg-tabc] mg-tabc-noreply@yahoogroups.com> To: mg-tabc mg-tabc@yahoogroups.com> Sent: Fri, Apr 27, 2018 3:00 pm Subject: [mg-tabc] Tach Reduction box I am in the midst of cleaning and refurbishing my tac reduction box. Some idiot (me) loaded it with chassis grease and it (thankfully) managed to work itself off the generator; else I suspect the would be nice shiny nubs where the gear teeth once meshed. My stupidity aside, does anyone have a recommendation for the gear oil the Book notes? And any other thoughts? Many Thanks, _Peter TC0604
As there is no gasket on that thing , I think oil will cover the engine bay Joe Curto718-762-7878www.joecurto.com -----Original Message----- From: mgtc@comcast.net [mg-tabc] mg-tabc-noreply@yahoogroups.com> To: mg-tabc mg-tabc@yahoogroups.com> Sent: Fri, Apr 27, 2018 3:00 pm Subject: [mg-tabc] Tach Reduction box I am in the midst of cleaning and refurbishing my tac reduction box. Some idiot (me) loaded it with chassis grease and it (thankfully) managed to work itself off the generator; else I suspect the would be nice shiny nubs where the gear teeth once meshed. My stupidity aside, does anyone have a recommendation for the gear oil the Book notes? And any other thoughts? Many Thanks, _PeterTC0604
As there is no gasket on that thing , I think oil will cover the engine bay Joe Curto 718-762-7878 www.joecurto.com -----Original Message----- From: mgtc@comcast.net [mg-tabc] mg-tabc-noreply@yahoogroups.com> To: mg-tabc mg-tabc@yahoogroups.com> Sent: Fri, Apr 27, 2018 3:00 pm Subject: [mg-tabc] Tach Reduction box I am in the midst of cleaning and refurbishing my tac reduction box. Some idiot (me) loaded it with chassis grease and it (thankfully) managed to work itself off the generator; else I suspect the would be nice shiny nubs where the gear teeth once meshed. My stupidity aside, does anyone have a recommendation for the gear oil the Book notes? And any other thoughts? Many Thanks, _Peter TC0604On Apr 28, 2018, at 10:48 AM, Joe Curto joecurto@aol.com> wrote:
Pessimist…or simply being realistic? I’ll let you know.
_Peter
Users browsing this forum: No registered users and 35 guests
