Handy engine building web site

Post Reply
Frank O_ The Mountain
Posts: 233
Joined: Thu Dec 25, 2008 3:02 pm

Handy engine building web site

Post by Frank O_ The Mountain » Mon Jul 29, 2002 9:51 am

Gents, I just discovered this site........seems like some good advice here. Terry in Oakland http://www.hastingsmfg.com/service_tips.htm
Top
R. Zwart
Posts: 54
Joined: Sat Jul 07, 2001 4:17 pm

Re: Handy engine building web site

Post by R. Zwart » Mon Jul 29, 2002 1:22 pm

They made some of the best cast iron rings.. I used them first in 1947, on my 1926 Buick; when I couldn't afford to rebore my scored cylinders. Those rings seated in within a week. I went from quart of oil per 200 miles to a quart every 1000 miles.... Still should be good. BOB taterry@aol.com wrote:
> Gents, I just discovered this site........seems like some good advice here. > Terry in Oakland > > http://www.hastingsmfg.com/service_tips.htm > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Top
Post Reply

Return to “MGATA”

Who is online

Users browsing this forum: No registered users and 10 guests