Re: Forwarded: Carb Float bowl banjo bolt hole repair

Post Reply
Roger Furneaux
Posts: 292
Joined: Mon Dec 13, 1999 4:38 pm

Re: Forwarded: Carb Float bowl banjo bolt hole repair

Post by Roger Furneaux » Mon Mar 18, 2002 2:58 am

hello Bob - hope you are keeping busy! A better source of these is Tracy Tools, just a few miles from me here in Devon. All their stuff is British, and better prices 'cos no middle-men! Am just about to order from them, but best for you to email them on: TracyTools@aol.com or Tel. +44 1803 833134 or FAX +44 1803 834588 and ask for your own catalogue. They now accept plastic so you should be able to get stuff quickly. a "Uni-Thread" 7/16" x 18tpi kit with 10 inserts is only 25. cheers TCRoger
>Can you help get me a thread repair kit for float bowl threads, 7/16 " - 18 >BSF. >Who and where are "Namrick"? >Thanks, Bob Grunau > > Helicoil etc ) >> > >Bob, I've been getting these from Namrick in UK......good fast service. >They come out of Oz, so price probably cheaper down there. >Terry > > > >--- >Outgoing mail is certified Virus Free. >Checked by AVG anti-virus system (http://www.grisoft.com). >Version: 6.0.338 / Virus Database: 189 - Release Date: 3/14/02 > >

Ray
Posts: 165
Joined: Sat Feb 03, 2007 10:55 pm

Re: Forwarded: Carb Float bowl banjo bolt hole repair

Post by Ray » Thu Mar 21, 2002 6:57 am

Tracy Tools has given me great service in the US, too! Best Regards, Ray "Remember- It's the collision with the planet that counts!"
----- Original Message ----- From: "Roger Furneaux" roger.46tc@virgin.net> To: cgrunau@pathcom.com> Cc: ".T-ABCs" mg-tabc@yahoogroups.com> Sent: Monday, March 18, 2002 4:55 AM Subject: [mg-tabc] Re: Forwarded: Carb Float bowl banjo bolt hole repair hello Bob - hope you are keeping busy! A better source of these is Tracy Tools, just a few miles from me here in Devon. All their stuff is British, and better prices 'cos no middle-men! Am just about to order from them, but best for you to email them on: TracyTools@aol.com or Tel. +44 1803 833134 or FAX +44 1803 834588 and ask for your own catalogue. They now accept plastic so you should be able to get stuff quickly. a "Uni-Thread" 7/16" x 18tpi kit with 10 inserts is only 25. cheers TCRoger >Can you help get me a thread repair kit for float bowl threads, 7/16 " - 18 >BSF. >Who and where are "Namrick"? >Thanks, Bob Grunau > > Helicoil etc ) >> > >Bob, I've been getting these from Namrick in UK......good fast service. >They come out of Oz, so price probably cheaper down there. >Terry > > > >--- >Outgoing mail is certified Virus Free. >Checked by AVG anti-virus system (http://www.grisoft.com). >Version: 6.0.338 / Virus Database: 189 - Release Date: 3/14/02 > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests