deer strike: klr:1 deer:0
-
- Posts: 2
- Joined: Mon Sep 04, 2000 1:16 pm
rear shock
Greetings,
Went to adjust the Spring Preload on my A-7 while on a ride in
Copper Canyon. The setting was in the number one position.
The adjuster bolt turns (I was turning it in the right direction) and
clicks but the setting stays the same. Feels like it is stripped. I
have'nt taken the shock off the bike to look at it yet. I was
wondering if this has happened to anyone else? Can it be fixed?
Thanks
Brian Coats
brcoats@...
-
- Posts: 237
- Joined: Mon Aug 23, 2010 6:23 pm
rear shock
Hi Everyone
My stock rear shock is set at "I" for the damping, and 1 for the shock absorber position.
By adjusting either or both of theses, Is it possible to make the rear end of the bike sit lower to the ground ?
If so which one/ones, and to want setting should I place them on ?
Many thanks
Dave
Salem OR
-
- Posts: 413
- Joined: Wed Apr 12, 2000 10:04 am
rear shock
Ever Since my freeway spill my bike has felt a little ( ok a lot )
different. I finally checked it out last night and it looks like my
rear shock is set to 1.. I don't think I have ever rode the bike with
it like that feels mushy.. Well I tried to adjust it and I get
nada.. So here comes the questions.. # 1 What aftermarket rear
shocks are offered for the KLR and much do they run.. #2 How much is
a stocker?
Dale
-
- Posts: 907
- Joined: Thu Apr 06, 2000 3:10 pm
rear shock
The most popular is the Larry Roeseler Progressive series in either the regular or shortened version. Price in the high 300 to 400's I think. Works will do a transplant. Ohlins makes a high end model which can set you back $600 or so...www.dual-star.com sells OEM shocks for under $200... Kurt> Ever Since my freeway spill my bike has felt a little ( ok a lot ) > different. I finally checked it out last night and it looks like my > rear shock is set to 1.. I don't think I have ever rode the bike with > it like that feels mushy.. Well I tried to adjust it and I get > nada.. So here comes the questions.. # 1 What aftermarket rear > shocks are offered for the KLR and much do they run.. #2 How much is > a stocker?
-
- Posts: 1178
- Joined: Tue Apr 11, 2000 6:45 pm
rear shock
Hey Dale, I will sell you my used shock (9k miles) for $50.
You can even use my Larin stand and tools to put it on.
There is a 6 pack of Bud Light rental fee for the stand
Contact me off list.
CA Stu A13
-----Original Message-----
Message: 21
Date: Tue, 14 Aug 2001 18:29:55 -0000
From: "Dale Johnson"
Subject: Rear Shock
Ever Since my freeway spill my bike has felt a little ( ok a lot )
different. I finally checked it out last night and it looks like my
rear shock is set to 1.. I don't think I have ever rode the bike with
it like that feels mushy.. Well I tried to adjust it and I get
nada.. So here comes the questions.. # 1 What aftermarket rear
shocks are offered for the KLR and much do they run.. #2 How much is
a stocker?
Dale

-
- Posts: 282
- Joined: Sun Apr 22, 2001 11:08 pm
rear shock
I like my Larry Roesseler 520 series from Progessive. Cost me $395
from Competition Accessories but they made me wait 3 months.
I ride the bike hard, and with this shock I no longer bottom out.
Steve G
--- In DSN_klr650@y..., "Dale Johnson" wrote: > Ever Since my freeway spill my bike has felt a little ( ok a lot ) > different. I finally checked it out last night and it looks like my > rear shock is set to 1.. I don't think I have ever rode the bike with > it like that feels mushy.. Well I tried to adjust it and I get > nada.. So here comes the questions.. # 1 What aftermarket rear > shocks are offered for the KLR and much do they run.. #2 How much is > a stocker? > > Dale
-
- Posts: 71
- Joined: Thu Jul 19, 2001 9:17 pm
rear shock
--- In DSN_klr650@y..., "Dale Johnson" wrote:
with> Ever Since my freeway spill my bike has felt a little ( ok a lot ) > different. I finally checked it out last night and it looks like my > rear shock is set to 1.. I don't think I have ever rode the bike
Do you mean that the preload adjustment has failed? Or that setting it to 5 still leaves you with a mushy ride? Don't forget there is a dampening adjustment (under the cover at the bottom of the shock) as well as the preload. Maybe it was changed?? Just a though before you spend the big bucks. David... A4, Victoria BC Canada> it like that feels mushy.. Well I tried to adjust it and I get > nada.. So here comes the questions.. # 1 What aftermarket rear > shocks are offered for the KLR and much do they run.. #2 How much is > a stocker? > > Dale
-
- Posts: 413
- Joined: Wed Apr 12, 2000 10:04 am
rear shock
it> Do you mean that the preload adjustment has failed? Or that setting
the> to 5 still leaves you with a mushy ride? > > Don't forget there is a dampening adjustment (under the cover at
It has failed, when i turn the adjustment bolt it clicks and nothing moves then gets real loose like it isn't threaded into anything> --snip
-
- Posts: 71
- Joined: Thu Jul 19, 2001 9:17 pm
rear shock
--- In DSN_klr650@y..., "Dale Johnson" wrote:
Oh, check the shock for a bent shaft - maybe it's bound up and that's
why the bolt broke. This is easy to test if you've removed the
spring. It will either slide in and out, or not.
Well, you could go to a tool store and pick up a set of automotive spring compressors (about $15 cdn - should fit), clamp down the spring (carefully - make sure it won't slip 'cause a compressed spring holds a lot of energy - enough to really hurt you), pull out the bolt (will probably need cir-clip pliers for this), and see what's broke. A bike shop could probably do this for you if your averse to buying tools and such... If the adjustment assembly is buggered beyond repair, you might be able to permanently fix it in one spot for real cheep. In any event, it's probably a lot cheeper to repair than it is to replace -- unless you were pushing the original beyond it's capabilities anyway. ---> You hit hard enough to break the preload adjustment on your shock... and you can still ride?? David... A4 Victoria BC Canada p.s with your preload set to negative 3 or so, I'm not surprised your ride is mushy> > > Do you mean that the preload adjustment has failed? Or that > ... > It has failed, when i turn the adjustment bolt it clicks and nothing > moves then gets real loose like it isn't threaded into anything

-
- Posts: 68
- Joined: Thu Jun 18, 2020 10:09 am
rear shock
Steve,
Did you mean "420"?
-- Marc, KLR650 A12, Loveland, Colorado, USA
"Steve Green" wrote:
__________
>I like my Larry Roesseler 520 series from Progessive. Cost me $395 >from Competition Accessories but they made me wait 3 months. >I ride the bike hard, and with this shock I no longer bottom out. > >Steve G
Who is online
Users browsing this forum: No registered users and 20 guests