bike cuts out
-
- Posts: 2434
- Joined: Thu Apr 06, 2000 10:08 am
bike cuts out
Check the clutch safety switch adjustment.
Or better yet... http://www.klr650.marknet.us/safetyswitch.html
Fred
http://www.arrowheadmotorsports.com
From: southampton12000
Sent: Monday, August 05, 2013 10:37 AM
To: DSN_KLR650@yahoogroups.com
Subject: [DSN_KLR650] bike cuts out
My friends bike is an 05. The bike some times cuts out when he pulls in the clutch to switch gears. some times its fine other times not.
Ideas? After stalling the bike will start but then cut out again.
brian
[Non-text portions of this message have been removed]
-
- Posts: 4
- Joined: Sat Mar 22, 2003 8:57 pm
just started backfiring and stalling.
I've got a 2000 (A14) with 20500 miles on it. I drove it two weeks ago and all was fine. Jumped on it today and with the choke completely off, the engine would back fire on release of the throttle and eventually stall when attempting to idle. If I gave it just a little choke all was well again; it drove like normal.
Anyone else had this problem? Any ideas what is likely the problem? The carb has never been touched. Plug was changed twice and valve clearances adjusted as needed. Everything else on it is factory stock except for doo-hickey replacement many years ago.
Thanks,
Bruce
-
- Posts: 39
- Joined: Mon Dec 10, 2012 9:27 am
just started backfiring and stalling.
Sounds like time to clean that carburetor, and check your exhaust nuts.
Michael
Sent from my iPad
Who is online
Users browsing this forum: No registered users and 29 guests