stalling when adding power from idle

[jwflower53]

1. On the web I saw these LEDs, less than an inch in diameter, $30 a pair, red or white, that stick on (I'm a little skeptical about that part). There's an optional box that makes them shimmer. Saw them on some website, can't find them now. Anybody know what the hell I'm talking about? 2. Would aftermarket LED turn signals work as running lights? These are two-wire, surface mount (as opposed to stalks or flush mount), just need a round hole to mount, come in various shapes and sizes. Why wouldn't they work as always-on conspicuity lights, albeit with a shorter bulb life than if used as turn signals? Anybody's interest piqued? Are we allowed to use French in this group? -JWF

[Michael Martin]

From: jwflower53 To: DSN_KLR650@yahoogroups.com Sent: Saturday, January 7, 2012 5:14 PM 1. On the web I saw these LEDs, less than an inch in diameter, $30 a pair, red or white, that stick on (I'm a little skeptical about that part). There's an optional box that makes them shimmer. Saw them on some website, can't find them now. Anybody know what the hell I'm talking about? I can't help you with the first question. 2. Would aftermarket LED turn signals work as running lights? These are two-wire, surface mount (as opposed to stalks or flush mount), just need a round hole to mount, come in various shapes and sizes. Why wouldn't they work as always-on conspicuity lights, albeit with a shorter bulb life than if used as turn signals? I think that they would work OK for this, and LED lights have a long life, too. Red would probably be illegal for forward-facing lights. Mike Martin, Louisville, KY [Non-text portions of this message have been removed]

[Jud]

--- In DSN_KLR650@yahoogroups.com, "jwflower53" wrote:

> Anybody's interest piqued? Are we allowed to use French in this group? -JWF >

To avoid this issue, say "peeked". At least it's not French, and some listers may not notice that it's wrong.

[mark ward]

"Motorcycle consumer news" (mag) did an artical on some led lights about the size of your pinky. they said the research on THEM came out good for being noticed more. People eyes catch the flash, but have learned to ignore the thousands of solid lights on. I have wondered about the $30. ones that you find in most auto stores, (auto zone, walmart, etc.) do they strobe at all times. and how long do they last?

--- On Sun, 1/8/12, Michael Martin wrote: From: Michael Martin Subject: Re: [DSN_KLR650] Conspicuity light questions To: "DSN_KLR650@yahoogroups.com" DSN_KLR650@yahoogroups.com> Date: Sunday, January 8, 2012, 2:49 AM From: jwflower53 To: DSN_KLR650@yahoogroups.com Sent: Saturday, January 7, 2012 5:14 PM 1. On the web I saw these LEDs, less than an inch in diameter, $30 a pair, red or white, that stick on (I'm a little skeptical about that part). There's an optional box that makes them shimmer. Saw them on some website, can't find them now. Anybody know what the hell I'm talking about? I can't help you with the first question. 2. Would aftermarket LED turn signals work as running lights? These are two-wire, surface mount (as opposed to stalks or flush mount), just need a round hole to mount, come in various shapes and sizes. Why wouldn't they work as always-on conspicuity lights, albeit with a shorter bulb life than if used as turn signals? I think that they would work OK for this, and LED lights have a long life, too. Red would probably be illegal for forward-facing lights. Mike Martin, Louisville, KY [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]

[KLR Bugeater]

Mr. Martin, I adapted my stock KLR turn signals into "running lights / turn signals". The inner single bulb needs to be removed and replaced with a dual filament bulb and dual contact electrics. I used a dremel tool with tiny grinder to accept a 2 filament bulb (stock # 1157). The main issues are 1) getting the stock metal housing to accept the new offset bolts for the 2 filament bulbs and 2) wiring the running lights to the propper running wiring. You can find dual filament contact innerds at any auto parts store. Then use the dremel to grind the metal housing to accept the new bulbs. Wire. Done. Only replace the electrical single contact electrical back of the housing with a 2 contact back. Do not replace the housing. Keep the housing and grind it to receive the new 2 filament bulb. You will note that the new bulb contacts are not aligned vs. the aligned contacts in the single filament bulb. KLR Bugeater John M. Sadowski KLRBugeater@... Sherrills Ford, NC

--- In DSN_KLR650@yahoogroups.com, Michael Martin wrote: > > > > From: jwflower53 > To: DSN_KLR650@yahoogroups.com > Sent: Saturday, January 7, 2012 5:14 PM > > > > > 1. On the web I saw these LEDs, less than an inch in diameter, $30 a pair, red or white, that stick on (I'm a little skeptical about that part). There's an optional box that makes them shimmer. Saw them on some website, can't find them now. Anybody know what the hell I'm talking about? > > > I can't help you with the first question. > > 2. Would aftermarket LED turn signals work as running lights? These are two-wire, surface mount (as opposed to stalks or flush mount), just need a round hole to mount, come in various shapes and sizes. Why wouldn't they work as always-on conspicuity lights, albeit with a shorter bulb life than if used as turn signals? > > I think that they would work OK for this, and LED lights have a long life, too. Red would probably be illegal for forward-facing lights. > > > Mike Martin, > Louisville, KY > > > > [Non-text portions of this message have been removed] >

[david.r.nichols@sbcglobal.net]

Here is a kit that turns your rear turn signals into running/brake lights using a red ring of LED's installed into your OEM turn signal housings. The turn signals remain amber and the running/brake lights are red. Link: http://www.twistedthrottle.com/trade/productview/4626/238/ YouTube video of the lights operation: http://www.youtube.com/watch?v=wP5VED2WhwM&feature=player_embedded In my opinion this is where you would want the turn signals as running lights, a headlight modulator is best for daylight visibility from the front. The above kit also increases your brake lights, which is the most important time to attract attention (when braking).

--- In DSN_KLR650@yahoogroups.com, "jwflower53" wrote: > > 1. On the web I saw these LEDs, less than an inch in diameter, $30 a pair, red or white, that stick on (I'm a little skeptical about that part). There's an optional box that makes them shimmer. Saw them on some website, can't find them now. Anybody know what the hell I'm talking about? > 2. Would aftermarket LED turn signals work as running lights? These are two-wire, surface mount (as opposed to stalks or flush mount), just need a round hole to mount, come in various shapes and sizes. Why wouldn't they work as always-on conspicuity lights, albeit with a shorter bulb life than if used as turn signals? > Anybody's interest piqued? Are we allowed to use French in this group? -JWF >

[RobertWichert]

For a brake light, you can't get easier than this: http://www.bikebandit.com/emgo-led-taillight-bulbs?WT.mc_id=1484958&CAWELAID=846616307 It kind of "rotates" when brakes are not on. Very annoying. When brakes are applied, if flashes like crazy. Guaranteed to irritate cagers every time. REALLY gets their attention. Robert Wichert P.Eng. LEED AP +1 916 966 9060 FAX +1 916 966 9068 ===============================================

On 1/9/2012 11:14 AM, david.r.nichols@... wrote: > > Here is a kit that turns your rear turn signals into running/brake > lights using a red ring of LED's installed into your OEM turn signal > housings. The turn signals remain amber and the running/brake lights > are red. > > Link: > http://www.twistedthrottle.com/trade/productview/4626/238/ > > YouTube video of the lights operation: > http://www.youtube.com/watch?v=wP5VED2WhwM&feature=player_embedded > http://www.youtube.com/watch?v=wP5VED2WhwM&feature=player_embedded> > > In my opinion this is where you would want the turn signals as running > lights, a headlight modulator is best for daylight visibility from the > front. The above kit also increases your brake lights, which is the > most important time to attract attention (when braking). > > --- In DSN_KLR650@yahoogroups.com > , "jwflower53" > wrote: > > > > 1. On the web I saw these LEDs, less than an inch in diameter, $30 a > pair, red or white, that stick on (I'm a little skeptical about that > part). There's an optional box that makes them shimmer. Saw them on > some website, can't find them now. Anybody know what the hell I'm > talking about? > > 2. Would aftermarket LED turn signals work as running lights? These > are two-wire, surface mount (as opposed to stalks or flush mount), > just need a round hole to mount, come in various shapes and sizes. Why > wouldn't they work as always-on conspicuity lights, albeit with a > shorter bulb life than if used as turn signals? > > Anybody's interest piqued? Are we allowed to use French in this > group? -JWF > > > > [Non-text portions of this message have been removed]

[David Nichols]

I've also heard good things about these "LED wow" tail lights: http://www.happy-trail.com/KLR650/LED-Tail-Light-Kit-WOW/KLR650.aspx%c2%a0 It can be set to flash for the first few seconds the brakes are used. ________________________________ From: RobertWichert To: "david.r.nichols@..." Cc: DSN_KLR650@yahoogroups.com Sent: Monday, January 9, 2012 1:47 PM Subject: Re: [DSN_KLR650] Re: Conspicuity light questions For a brake light, you can't get easier than this: http://www.bikebandit.com/emgo-led-taillight-bulbs?WT.mc_id=1484958&CAWELAID=846616307 It kind of "rotates" when brakes are not on. Very annoying. When brakes are applied, if flashes like crazy. Guaranteed to irritate cagers every time. REALLY gets their attention. Robert Wichert P.Eng. LEED AP +1 916 966 9060 FAX +1 916 966 9068 ===============================================

On 1/9/2012 11:14 AM, david.r.nichols@... wrote: > > Here is a kit that turns your rear turn signals into running/brake > lights using a red ring of LED's installed into your OEM turn signal > housings. The turn signals remain amber and the running/brake lights > are red. > > Link: > http://www.twistedthrottle.com/trade/productview/4626/238/ > > YouTube video of the lights operation: > http://www.youtube.com/watch?v=wP5VED2WhwM&feature=player_embedded > http://www.youtube.com/watch?v=wP5VED2WhwM&feature=player_embedded> > > In my opinion this is where you would want the turn signals as running > lights, a headlight modulator is best for daylight visibility from the > front. The above kit also increases your brake lights, which is the > most important time to attract attention (when braking). > > --- In DSN_KLR650@yahoogroups.com > , "jwflower53" > wrote: > > > > 1. On the web I saw these LEDs, less than an inch in diameter, $30 a > pair, red or white, that stick on (I'm a little skeptical about that > part). There's an optional box that makes them shimmer. Saw them on > some website, can't find them now. Anybody know what the hell I'm > talking about? > > 2. Would aftermarket LED turn signals work as running lights? These > are two-wire, surface mount (as opposed to stalks or flush mount), > just need a round hole to mount, come in various shapes and sizes. Why > wouldn't they work as always-on conspicuity lights, albeit with a > shorter bulb life than if used as turn signals? > > Anybody's interest piqued? Are we allowed to use French in this > group? -JWF > > > > [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]

[jgormley123]

--- In DSN_KLR650@yahoogroups.com, Eric J Foster wrote:

> > Same problem as everyone else that improperly stores their bike. Put the > gas on reserve, open bottom of carb and let flush for 30 seconds or so. > Everything back to norm, go ride! > > ALWAYS drain carb if the bike is going to sit for a few days or more. > > E >

I opened the drain.. and only a bowl full came out... So I started the bike up to run some gas through the bowl.. I then noticed that the problem went away... Rev with choke on..OK, rev with choke off.. OK.. So I closed the drain and removed the vent tube... Ran great... The original tube is gone, and this one runs up to the space under the seat... so its blocked somewhere.. or really need to have the section going down..