adjusting rear shock

[dhillam]

Is there anyone out there that knows of a product that will make faded fender and side covers look new again?

[a14@att.net]

> Is there anyone out there that knows of a product that will make faded > fender and side covers look new again? >

Any fine polish (except Bogdan) and lots of elbow grease. Walt

[dooden]

PreLoad - 12mm bolt head top (shifter side) clunks from setting to setting until you get to 5, then it slams back to 1. clockwise only.. (Might need to give it a WD-40 douche if its been sitting for a while) Rebound - On bottom (rear brake side) is the rebound setting, its under a plastic cover that once you see it, you will wonder how it stays there. (just a little wheel you turn in the base of the shock) Dooden A15 Green Ape (Penned up for the winter now) --- In DSN_KLR650@yahoogroups.com, "sweetbellsonbike" wrote:

> > Probably a lame question... > My rear shock is set on 1. I need to set it on 2 - I need a firmer > ride. My manual shows - not very clearly - how to change the setting > with the shock off the bike. Can I do it with the shock on? How? > > Thanks in advance. > > Buck. >