any comments on joe rocket jackets?

DSN_KLR650
Post Reply
ice_master_flash
Posts: 1
Joined: Tue Feb 14, 2006 6:01 pm

tank shrouds

Post by ice_master_flash » Tue Feb 14, 2006 6:01 pm

Hello KLR group. I am happy to be a member of this group. i live in telluride. my buddies and i spend our time doing long maountain passes and trail rides. i have a quick questions if anybody can answer it. I need some new tank shrouds (both sides). i found some on ebay for a 2002 klr650. mine is a 2005 klr 650. do you know if those will fit? Thanks for the help. Let me know if you are in the area.

Denis Dimick
Posts: 149
Joined: Fri Nov 26, 2004 7:18 pm

tank shrouds

Post by Denis Dimick » Tue Feb 14, 2006 6:15 pm

They should fit just fine, however the colors may not match. Denis
On 2/14/06, ice_master_flash wrote: > > Hello KLR group. I am happy to be a member of this group. > i live in telluride. my buddies and i spend our time doing long > maountain passes and trail rides. > i have a quick questions if anybody can answer it. > I need some new tank shrouds (both sides). i found some on ebay for a > 2002 klr650. mine is a 2005 klr 650. do you know if those will fit? > > Thanks for the help. Let me know if you are in the area. > > > > > > Archive Quicksearch at: > http://www.angelfire.com/ut/moab/klr650_data_search.html > List sponsored by Dual Sport News at: www.dualsportnews.com > List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html > Member Map at: http://www.frappr.com/dsnklr650 > Yahoo! Groups Links > > > > > > > [Non-text portions of this message have been removed]

Jim
Posts: 1560
Joined: Thu Jun 07, 2001 11:15 am

tank shrouds

Post by Jim » Thu Feb 16, 2006 11:50 am

> I need some new tank shrouds (both sides).
If the plastic tabs have been forcefully removed then drill a couple of small holes and use zip ties to attach the shroud(s) to the bike. --Jim A-15

Norm Keller

tank shrouds

Post by Norm Keller » Fri Feb 17, 2006 4:54 pm

>> I need some new tank shrouds (both sides). >If the plastic tabs have been forcefully removed then >drill a couple >of small holes and use zip ties to attach the
shroud(s) to >the bike. If the mounting "bayonets" have snapped off of the shrouds as happened when my A18 was a few months old, you may wish to simply drill the shrouds and reattach the bayonets by means of small sheet metal screws. HIH Norm __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

Norm Keller

any comments on joe rocket jackets?

Post by Norm Keller » Fri Feb 17, 2006 4:55 pm

The mesh (summer) jacket with the zip out waterproof liner works super for me. I also have a Velocity heavy weight jacket for cold weather. My Joe Rocket is good unless wet when it is cold due to evaporation. For cold mountain sections in the summer I use a pile jacket underneath and a waterproof wind breaker over the Joe Rocket. This combo is almost as warm as my Velocity. If looking for a warm/hot weather jacket I highly recommend the Joe Rocket but strongly recommend that you get the model which includes the zip out waterproof liner. HIH Norm __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

Post Reply

Who is online

Users browsing this forum: No registered users and 29 guests