front master problems.

DSN_KLR650
Post Reply
georgew_del
Posts: 2
Joined: Sun Dec 05, 2004 3:57 am

posting to the list

Post by georgew_del » Fri Dec 24, 2004 7:30 am

Hi Seems there's no way I can post to the list unless I do it through the web. I post to a number of other lists in text through my mailer Forte Agent. Why is this one different? Can anyone tell me how to change preferences or something to enable me to mail to the list without needing to use the web for email (something I do not want to do)? -- Dr Isaac

Doug Herr
Posts: 727
Joined: Tue Apr 15, 2003 8:02 pm

posting to the list

Post by Doug Herr » Fri Dec 24, 2004 10:23 am

On Fri, 24 Dec 2004, georgew_del wrote:
> Hi > Seems there's no way I can post to the list unless I do it through > the web. > I post to a number of other lists in text through my mailer Forte > Agent. Why is this one different? Can anyone tell me how to change > preferences or something to enable me to mail to the list without > needing to use the web for email (something I do not want to do)?
You must sent to DSN_klr650@yahoogroups.com. You must send *from* an e-mail address that is registered with Yahoo in the prefs. Pretty sure that is all that is required. -- Doug Herr doug@...

Fred Hink
Posts: 2434
Joined: Thu Apr 06, 2000 10:08 am

posting to the list

Post by Fred Hink » Fri Dec 24, 2004 10:33 am

Are you using this address to send your messages by email? DSN_klr650@yahoogroups.com Fred List Admin.
----- Original Message ----- From: "georgew_del" To: DSN_klr650@yahoogroups.com> Sent: Friday, December 24, 2004 5:48 AM Subject: [DSN_klr650] Posting to the list > > > Hi > Seems there's no way I can post to the list unless I do it through > the web. > I post to a number of other lists in text through my mailer Forte > Agent. Why is this one different? Can anyone tell me how to change > preferences or something to enable me to mail to the list without > needing to use the web for email (something I do not want to do)? > > -- > Dr Isaac

georgew_del
Posts: 2
Joined: Sun Dec 05, 2004 3:57 am

posting to the list

Post by georgew_del » Fri Dec 24, 2004 1:40 pm

Hi Seems there's no way I can post to the list unless I do it through the web. I post to a number of other lists in text through my mailer Forte Agent. Why is this one different? Can anyone tell me how to change preferences or something to enable me to mail to the list without needing to use the web for email (something I do not want to do)? -- Dr Isaac

Don Van Dyke
Posts: 60
Joined: Tue Nov 02, 2004 8:00 am

posting to the list

Post by Don Van Dyke » Fri Dec 24, 2004 2:06 pm

I couldn't say what the issue is in your case, but I have learned that if the computer or e-mail client that you send e-mail from does not generate a "From" header on your outgoing e-mail identical to that which you used to become a member of the list, then the server will not post your messages. In this case, you just need to send messages from the same e-mail address you used to when you joined the list, or see if you can modify how Yahoo! recognizes you. At 12:48 PM 12/24/2004 +0000, georgew_del wrote:
>Hi >Seems there's no way I can post to the list unless I do it through >the web. >I post to a number of other lists in text through my mailer Forte >Agent. Why is this one different? Can anyone tell me how to change >preferences or something to enable me to mail to the list without >needing to use the web for email (something I do not want to do)? > >-- >Dr Isaac >
Don Van Dyke Sacramento, California Moto@... www.intellection.org

ron criswell
Posts: 1118
Joined: Fri Apr 07, 2000 5:09 pm

front master problems.

Post by ron criswell » Fri Dec 24, 2004 5:51 pm

Check for a warped rotor. I had similar problems a couple of years ago and it was the rotor which wasn't noticeably warped till you took it off. It looked like a Frisbee when off. What caused this was an extremely dirty caliper that froze and over heated it. those calipers just don't like soupy mud. Criswell Doug Herr wrote:
> On Thu, 23 Dec 2004, Eduardo wrote: > > > The front brakes are very `soft'. > > > > I hold these truths to be self evident. > > It is not air in the lines. > > How do you know? > > > It is not from soft brake lines. > > The caliper is perfect. > > > > The pads do not completely release. > > The master cylinder squirts a lot more than normal!! > > How did you observe this? > > > Can I rebuild the master cyl. Or should I replace it? > > Is this a known issue? > > Not sure on either, just asking questions that would seem to help > folk to diagnose this. > > -- > Doug Herr > doug@... > > List sponsored by Dual Sport News at www.dualsportnews.com > List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html > > > Yahoo! Groups Links > > > >

Post Reply

Who is online

Users browsing this forum: No registered users and 22 guests