balancer drive gear removal?

DSN_KLR650
windows
Posts: 2
Joined: Sun Mar 31, 2002 6:00 pm

gps mount

Post by windows » Sun Mar 31, 2002 7:00 pm

I have a Magellan 330 and made a mount that bolts to the left front fork. There are 2 bolts to hook to. My primary objective was to get the screen at the same level as the "dash". I learned from the Kawasaki tank bag position (I have to stop to look down at the map) that the view distance and angle is important. This had the other advantage of minimizing vibration. Since it is rigid there is no whip or amplified vibrations from a handle bar mount. The 330 is not as large as the new Magellans but I think almost any size could be mounted just to the left of the dash. If anyone interested, write me and I will go into more detail, maybe borrow the neighbor's camera and post a photo. Bob in FtWorth [Non-text portions of this message have been removed]

neilyeatman
Posts: 1
Joined: Tue Apr 01, 2003 7:45 pm

gps mount

Post by neilyeatman » Tue Apr 01, 2003 8:45 pm

Hi folks, just about to take delivery of my 2003 KLR, and I want to get a new GPS for it...in particular, a Garmin GPSMap76S. Has anybody got one of these installed, and if so, using which mount? I've looked at the RAM mounts, and one that looks like a good fit is the RAM-B-149Z-GA6, has anyone used it, and can you have the GPS on the bars without blocking the instruments? There's actually a pic of an older KLR here but I can't tell how it's mounted... http://www.gpscentral.ca/graphics/Photos/russsep1full.jpg http://www.gpscentral.ca/graphics/Photos/russsep2full.jpg Thanks in advance for any advice... :) Neil Ajax, Ontario

Sean Noll
Posts: 23
Joined: Sun Mar 09, 2003 11:39 am

gps mount

Post by Sean Noll » Tue Apr 01, 2003 9:13 pm

I have to thank a lister for this (but I think it was on one of the dualsport lists). This item works great: http://www.denniskirk.com/powervendor/details/detail.asp?serverid=nlStreet&P artNo=27401 I liked this option because I will probably change GPSs every couple of years and dont really want to blow $100 on a customized rack. This thing graps the snot out of it - vibration is very minimal as well. Cheers, Sean A16
----- Original Message ----- From: "neilyeatman" To: DSN_klr650@yahoogroups.com> Sent: Tuesday, April 01, 2003 8:27 PM Subject: [DSN_klr650] GPS Mount > Hi folks, just about to take delivery of my 2003 KLR, and I want to > get a new GPS for it...in particular, a Garmin GPSMap76S. Has > anybody got one of these installed, and if so, using which mount? > > I've looked at the RAM mounts, and one that looks like a good fit is > the RAM-B-149Z-GA6, has anyone used it, and can you have the GPS on > the bars without blocking the instruments? There's actually a pic > of an older KLR here but I can't tell how it's mounted... > > http://www.gpscentral.ca/graphics/Photos/russsep1full.jpg > http://www.gpscentral.ca/graphics/Photos/russsep2full.jpg > > Thanks in advance for any advice... :) > > Neil > Ajax, Ontario > > > List sponsored by Dual Sport News at www.dualsportnews.com. List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html > Unsubscribe by sending a blank message to: > DSN_klr650-unsubscribe@yahoogroups.com . > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >

vintageracer8882
Posts: 121
Joined: Tue May 04, 2004 6:26 pm

gps mount

Post by vintageracer8882 » Fri Oct 01, 2004 9:00 am

my buddy just bought a gps to use on a trip that we are beginning to plan for next year. going out to explore the badlands. anyway, does anyone have pics of the way they have their gps mounted. he also needs a 12v lighter plug but is concerned bout the thing getting corroded. you guys know of a marine type lighter plug ?? thanks guys, scott

Tengai Mark Van Horn
Posts: 1922
Joined: Tue Nov 19, 2002 8:31 pm

gps mount

Post by Tengai Mark Van Horn » Fri Oct 01, 2004 9:13 am

At 1:59 PM +0000 10/1/04, vintageracer8882 wrote:
>my buddy just bought a gps to use on a trip that we are beginning to >plan for next year. going out to explore the badlands. anyway, does >anyone have pics of the way they have their gps mounted. he also >needs a 12v lighter plug but is concerned bout the thing getting >corroded. you guys know of a marine type lighter plug ?? thanks >guys, scott
I just use a RAM mount for my GPS attached to the handlebars. Rather than using a cigarette lighter to power it, I recommend using a flat 2-pole connector, like the ones used on some heated clothing, battery tenders, etc. A cigarette lighter is still good to have on the bike for other things and you can get an all-weather one with a gasket-sealed, spring-loaded door at Wal-Mart for about $7.00. Mark

Ramey
Posts: 205
Joined: Thu Apr 25, 2002 6:49 pm

gps mount

Post by Ramey » Fri Oct 01, 2004 9:23 am

Have used a unit from Napa on boats and cycles. Has a gasketed snap spring door and sealed at the wire entrance. Bit spendy. $10-15. Works well -----Original Message----- From: vintageracer8882 [mailto:vintageracer8882@...] Sent: Friday, October 01, 2004 6:59 AM To: DSN_klr650@yahoogroups.com Subject: [DSN_klr650] gps mount my buddy just bought a gps to use on a trip that we are beginning to plan for next year. going out to explore the badlands. anyway, does anyone have pics of the way they have their gps mounted. he also needs a 12v lighter plug but is concerned bout the thing getting corroded. you guys know of a marine type lighter plug ?? thanks guys, scott List sponsored by Dual Sport News at www.dualsportnews.com. List FAQ courtesy of Chris Krok at: www.bigcee.com/klr650faq.html Unsubscribe by sending a blank message to: DSN_klr650-unsubscribe@yahoogroups.com . Yahoo! Groups Links

Devon
Posts: 933
Joined: Sun Jun 03, 2001 7:13 pm

gps mount

Post by Devon » Fri Oct 01, 2004 9:45 am

No photos, but I use some doubled up duct tape for a vibration dampening pad, then duct tape the sh*T out of it, sticking it down to the gas cap. On a KLR you only need to peel it off once a day, if that. Plus it's VERY protected in that position. Devon vintageracer8882@... wrote:
>my buddy just bought a gps to use on a trip that we are beginning to >plan for next year. going out to explore the badlands. anyway, does >anyone have pics of the way they have their gps mounted. he also >needs a 12v lighter plug but is concerned bout the thing getting >corroded. you guys know of a marine type lighter plug ?? thanks >guys, scott > > >

Larry
Posts: 165
Joined: Wed Jun 29, 2011 7:47 pm

gps mount

Post by Larry » Fri Oct 01, 2004 10:47 am

--- In DSN_klr650@yahoogroups.com, "vintageracer8882" wrote:
> my buddy just bought a gps to use on a trip that we are beginning
to
> plan for next year. going out to explore the badlands. anyway,
does
> anyone have pics of the way they have their gps mounted. he also > needs a 12v lighter plug but is concerned bout the thing getting > corroded. you guys know of a marine type lighter plug ?? thanks > guys, scott
I have the Garmin V and use the Toratech 065-0035 http://www.cycoactive.com/gps/gps_mounts.html#065-0035 and it works well, and survived ESR 2004. http://www.merceddirtriders.com/html/DCP_5065.html Also check the following. http://www.cycoactive.com/gps/gallery/dirt_gpsmount.html Larry

domenickadoo
Posts: 31
Joined: Wed Jan 16, 2002 11:03 am

gps mount

Post by domenickadoo » Fri Oct 01, 2004 10:50 am

Check out Overtons.com, i use them for all my boating needs. Search for item # 26207, a little pricey at 22 bucks, but very weather proof. --- In DSN_klr650@yahoogroups.com, "vintageracer8882" wrote:
> my buddy just bought a gps to use on a trip that we are beginning
to
> plan for next year. going out to explore the badlands. anyway,
does
> anyone have pics of the way they have their gps mounted. he also > needs a 12v lighter plug but is concerned bout the thing getting > corroded. you guys know of a marine type lighter plug ?? thanks > guys, scott

dsjpmorris
Posts: 1
Joined: Fri Oct 01, 2004 10:08 am

balancer drive gear removal?

Post by dsjpmorris » Fri Oct 01, 2004 11:08 am

Can anyone please help. Unfortunately had a total failure of the Doorhickey, causing the chain to jump sending the balancer syncronisation out and round off several teeth on the drive gear. This gear is available from dealer as one piece (it includes timing chain gear), but has anyone manange to get this gear off the crankshaft with the shaft still in the bike. I believe the gear is shrunk/sweated on.

Post Reply

Who is online

Users browsing this forum: No registered users and 26 guests