short windscreen

[klrbill]

I cut my stock one down about an inch then used rolled edge (used on snowmobile sheilds). I tested different heights using an old saftey mask sheild duct taped on. kept lowering it until the noise went away then cut my sheild to that height. I'm 6.0' btw.

--- In DSN_klr650@yahoogroups.com, "Dooden" wrote: > On the fairing, remove the 3 screws and take the shield off, then > replace it with nothing... Tada.. even shorter yet. > some have reported better results without it. Looking at the bug > splats on mine when I got home last night, I think I will keep it > there for now. > > Dooden > > > > --- In DSN_klr650@yahoogroups.com, "Greg S" wrote: > > I thought I remembered seeing a shorter-than-stock windscreen > available for > > the KLR somewhere. I did a quick search through the archive, but > only found > > references to homemade jobs. > > > > Has anyone seen a commercially available KLR windscreen that was > only 1" or > > 2" high? > > > > Greg > > Seattle > > > > > > [Non-text portions of this message have been removed]