The tacho is electrically operated. If the needle moves around more than you think the engine revs are changing, then I suspect that you have an electrical problem. Considering the dealer would have had the tank off to do the valve clearances, I would take the tank off an check the fit of the connectors under the tank. There are a few down there, but a close look at the connector to the CDI unit would be in order. Mister_T Melbourne Australia> Not only that, but now my bike is unusable. They screwed something up > bad. When I rode out on Friday, it seemed ok, maybe because it was > cold? Yesterday, sunny and warm, after riding about 10 KM, it started > to misbehave badly. I don't know the proper term to explain, but it > felt like it was out of gas, the OK again, then out of gas...The RPM > needle would jump like crazy when the "out of gas" effect was > happenning. Scary stuff.
sidecovers?
-
Ted Palmer
- Posts: 1068
- Joined: Sat Apr 08, 2000 7:09 am
tune-up question - (thanks for replies on "wrong tire direction
risotto67 wrote:
[post dealer service woes]
-
jhobrut
- Posts: 5
- Joined: Mon Apr 22, 2002 6:46 pm
sidecovers?
Would like to buy a pair of used sidecovers to paint and use on my
Tengai. Any available? Would like to be good shape, no cracks or
breaks. Thanks.
This list has been a great source for this new KLRer.
Who is online
Users browsing this forum: No registered users and 57 guests