etrex (nklr)

DSN_KLR650
Post Reply
mrldn@yahoo.com
Posts: 1
Joined: Thu Mar 01, 2001 11:11 am

klr a15 coolant temp.

Post by mrldn@yahoo.com » Thu Mar 01, 2001 11:11 am

As a new onwer of a a15, just wondering what the water temp gauge normally runs at, ambient temp around 4c to 12c. Mine tends to heat up high going to just this side of the thick line on the gauge, and then cools right down to a little less than half on the gauge. This tends to happen usually first time when started cold, Electric fan seems too come on at a little past 3/4 on the gauge. Just wondering if this is normal, my other bikes have all been a/cooled. thanks Tony.

Brad Davis
Posts: 496
Joined: Fri Apr 28, 2000 8:06 am

klr a15 coolant temp.

Post by Brad Davis » Thu Mar 01, 2001 11:40 am

--- In DSN_klr650@y..., mrldn@y... wrote:
> As a new onwer of a a15, just wondering what the water temp gauge > normally runs at, ambient temp around 4c to 12c. Mine tends to heat > up high going to just this side of the thick line on the gauge, and > then cools right down to a little less than half on the gauge. This > tends to happen usually first time when started cold, Electric fan > seems too come on at a little past 3/4 on the gauge. Just wondering
if
> this is normal, my other bikes have all been a/cooled. thanks Tony.
Tony, I drive an A9 and it does the same. When the engine is cold it heats up to 2/3 of full scale and then drops down to 1/4 scale as if the thermostat opened up. While stopped at traffic lights it heats up until the fan turns on which I think is 3/4 full stroke. I think everything is OK on your bike. Take Care, Brad

Rev.Chuck
Posts: 296
Joined: Tue Aug 29, 2000 12:20 pm

etrex (nklr)

Post by Rev.Chuck » Thu Mar 01, 2001 12:01 pm

>I have a Garmin E-Trex and bought the handlebar mount and the DC plug. I >like the GPS for its simplicity. I'd like the mapping models but am afraid >I'd just crash! Does anyone have experience with the Etrex on a cycle?
The eTrex is all I have ever used. I use it on the KLR, hiking, biking and in my truck. I don't use the handle bar mount though, I wasn't sure it would meet my demanding needs in the arena of vibration resistance and overall strength, but I do hope it works well for you. I have had my eTrex in the water, heavy dust, bright sunlight for hours and dropped, but have never had fail. Take a look at my site for how I mounted it to the KLR if your interested... == Rev. Chuck :^)>+ A13 http://KLR650.WWW.50Megs.Com/ http://DualSports.OnWeb.CX/ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ _____________________________________________________________

Post Reply

Who is online

Users browsing this forum: No registered users and 28 guests