DSN_KLR650
-
Razvan
- Posts: 11
- Joined: Sat Dec 02, 2000 7:49 pm
Post
by Razvan » Thu Jan 04, 2001 1:07 am
Hi all.
I just took off one of the axles of the unitrack. I had to really beat on it to take
it off. It seems the frame is bent. Or maybe this is the way it is?
[img]cid:part1.3A54220E.81168C82@...[/img]
The axle will not go through both holes easily. I have to bent the frame with my hands and hammer it in.
[img]cid:part2.3A54220E.81168C82@...[/img]
Should i worry about this or just hammer it back in and pull jumps and wheelie again.
Anybody else had this problem? Or is this the way the frame is made. The bike
has never been crashed but has jumped many times.
Can I get the bearings out of the link or are they pressed in there.
One of them is not moving at all. Any suggestions.
[img]cid:part3.3A54220E.81168C82@...[/img]
Look what I got for Christmas. It's a mini KLR.
[img]cid:part4.3A54220E.81168C82@...[/img]
Anyone knows where I can get a bigger model?
Thankx
Raz
A8.
-
Eric and Rheva Lewis
- Posts: 76
- Joined: Tue Apr 18, 2000 11:53 pm
Post
by Eric and Rheva Lewis » Thu Jan 04, 2001 1:34 am
Attachments : Where'd you get the mini KLR? Eric A8
----- Original Message ----- [b]From:[/b] cccp7@... [b]To:[/b]
DSN_klr650@egroups.com [b]Sent:[/b] Wednesday, January 03, 2001 9:11 PM [b]Subject:[/b] [DSN_klr650] FRAME QUESTION
Hi all.
I just took off one of the axles of the unitrack. I had to really beat on it to take
it off. It seems the frame is bent. Or maybe this is the way it is?
[img]cid:000c01c07620$c2fa79c0$264b4140@lewiser[/img]
The axle will not go through both holes easily. I have to bent the frame with my hands and hammer it in.
[img]cid:000d01c07620$c2fa79c0$264b4140@lewiser[/img]
Should i worry about this or just hammer it back in and pull jumps and wheelie again.
Anybody else had this problem? Or is this the way the frame is made. The bike
has never been crashed but has jumped many times.
Can I get the bearings out of the link or are they pressed in there.
One of them is not moving at all. Any suggestions.
[img]cid:000e01c07620$c2fa79c0$264b4140@lewiser[/img]
Look what I got for Christmas. It's a mini KLR.
[img]cid:000f01c07620$c2fa79c0$264b4140@lewiser[/img]
Anyone knows where I can get a bigger model?
Thankx
Raz
A8.
-
Bill Pratt
- Posts: 75
- Joined: Sat Apr 08, 2000 12:43 pm
Post
by Bill Pratt » Thu Jan 04, 2001 8:21 am
Attachments : You can get them on e-bay. Bill Pratt, Mill Creek, WA
STOC#117 - 97' ST1100 ABS, KLR650-A12
http://msnhomepages.talkcity.com/ResortRd/billp117/
"No matter where you go...there you are!"
----- Original Message ----- [b]From:[/b] lewiser@... [b]To:[/b]
DSN_klr650@egroups.com ; cccp7@... [b]Sent:[/b] Wednesday, January 03, 2001 11:34 PM [b]Subject:[/b] Re: [DSN_klr650] FRAME QUESTION
Where'd you get the mini KLR? Eric A8 ----- Original Message ----- [b]From:[/b] cccp7@... [b]To:[/b]
DSN_klr650@egroups.com [b]Sent:[/b] Wednesday, January 03, 2001 9:11 PM [b]Subject:[/b] [DSN_klr650] FRAME QUESTION
Hi all.
I just took off one of the axles of the unitrack. I had to really beat on it to take
it off. It seems the frame is bent. Or maybe this is the way it is?
[img]cid:001801c07659$96dff340$65b40304@...[/img]
The axle will not go through both holes easily. I have to bent the frame with my hands and hammer it in.
[img]cid:001901c07659$96dff340$65b40304@...[/img]
Should i worry about this or just hammer it back in and pull jumps and wheelie again.
Anybody else had this problem? Or is this the way the frame is made. The bike
has never been crashed but has jumped many times.
Can I get the bearings out of the link or are they pressed in there.
One of them is not moving at all. Any suggestions.
[img]cid:001a01c07659$96dff340$65b40304@...[/img]
Look what I got for Christmas. It's a mini KLR.
[img]cid:001b01c07659$96dff340$65b40304@...[/img]
Anyone knows where I can get a bigger model?
Thankx
Raz
A8.
Visit the KLR650 archives at
http://www.listquest.com/lq/search.html?ln=klr650
Support Dual Sport News... dsneditor@...
Let's keep this list SPAM free!
Visit our site at
http://www.egroups.com/group/DSN_klr650
To unsubscribe from this group, send an email to:
DSN_klr650-unsubscribe@egroups.com
-
Bogdan Swider
- Posts: 2759
- Joined: Thu Apr 06, 2000 2:04 pm
Post
by Bogdan Swider » Thu Jan 04, 2001 6:20 pm
> I just took off one of the axles of the unitrack. I had to really beat
> on it to take
> it off. It seems the frame is bent. Or maybe this is the way it is?
>
Seems to be the way it is especially if it wasn't adequately
greased. Wait till you get to the swingarm axle. When we removed Rex's we
had to pound it full blast with a wood splitter (a heavy blunt axe). Bogdan
-
Dennis M. Griffin
- Posts: 5
- Joined: Fri Nov 10, 2000 4:49 pm
Post
by Dennis M. Griffin » Thu Jan 04, 2001 9:24 pm
Re: [DSN_klr650] FRAME QUESTION on 1/4/01 12:11 AM, Razvan at cccp7@... wrote:
[quote]Hi all.
I just took off one of the axles of the unitrack. I had to really beat on it to take
it off. It seems the frame is bent. Or maybe this is the way it is?
The axle will not go through both holes easily. I have to bent the frame with my hands and hammer it in.
Should i worry about this or just hammer it back in and pull jumps and wheelie again.
You may want to try loosening all the engine mounting bolts. This may allow the frame to relax back into alignment. When I installed my Progressive rear shock, I did this before removing any of the link hardware or the swingarm pivot bolt. I found that by doing so, I was able to disassemble everything without any force, even though the main link pivot bolt had started to corrode. Upon reassembly, I snugged everything up, then torqued the engine mount bolts last. I used Sta-Lube Moly-Graph grease on all bearings and bolts (but not the threads).
Good luck,
Dennis
A14 in Scottsdale, AZ [/quote]
-
wschase@aol.com
- Posts: 112
- Joined: Fri Apr 14, 2000 12:01 am
Post
by wschase@aol.com » Fri Jan 05, 2001 6:12 am
In a message dated 1/4/2001 9:25:32 PM Pacific Standard Time,
garagedoor79@... writes:
> Anyone going to the Ride the Rio
> Rally in February In Fort Smith/Big Bend area?
Sounds cool! Anyone got any good trail links or map links to the
area? How is the trail riding there? I've got a serious case of the
winter dooldrums going on and I just got to throw a leg over the KLR
before I go insane!!!
Karl
Geez! I said "Fort Smith"??? LOL.....I meant Fort Davis!
Users browsing this forum: No registered users and 28 guests