[dsn_klr650] ktm 620exc, torque wrenches and feeler gauges, oh

[Zachariah Mully]

I might have mislead you a bit... It is not the Russell speed bleeders that was I talking about but a little plastic bottle with a hose and a one way valve on it. This allows for one-person bleeding as you don't have to worry so much about sucking air into the lines from the bleeder side of things (you still have to watch the main reservoir though)... It was $3.99 I think (part 37201-1VGA)? I know that they had a mity-vac setup for $50 if you wanted to go deluxe. You can go to http://www.harborfreight.com to look at the stuff... The 1/4" in-lbs torque wrench is part 02696-2rgh. Zack SE DC 1991 KLR650 -----Original Message----- From: John Irvine [mailto:jirvine@...] Sent: Thursday, September 07, 2000 2:02 PM To: Zachariah Mully Subject: Re: [DSN_klr650] KTM 620exc, Torque Wrenches and Feeler Gauges, oh my! NKLR How is their brake bleeder? and how much? TIA At 10:54 AM 9/7/2000 -0500, you wrote: