[dsn_klr650] klr graphics
-
carmic7@aol.com
- Posts: 75
- Joined: Thu Apr 06, 2000 8:10 pm
[dsn_klr650] klr graphics
In a message dated 8/28/00 9:04:34 PM, john.magee@... writes:
> >>
There is no pretty way to pull a decal out from under a clear coat, the tank
must be stripped and painted again, you could use a 300-600 grit sandpaper on
a jitterbug sander to sand out the lines and then apply more of the same
clear coat
-neil