[dsn_klr650] nklr - horsepower klr250? and dyno 650

[Jim & Shannon Morehead]

Hi Brian, It sure sounds like you have a wealth of experience to share with the group! Take a look at the files section of www.egroups.com and peruse the archives for supporting info. A search for the word "dyno" might do it, but if you have trouble finding the info, please e-mail me and I will send my info to you directly. I'm having a little trouble interpreting the graphs you posted recently. What units of power are on the "Y" axis of your graph? Do you have tabular data you can post with rpm.vs.horsepower and torque? Jim

----- Original Message ----- From: To: Cc: DSN_klr650@egroups.com> Sent: Monday, August 14, 2000 2:37 PM Subject: Re: [DSN_klr650] NKLR - Horsepower KLR250? and dyno 650 > Hi Jim > > No I have not seen your postings but would like to. > > Will try and scan and send both ways. > > Thanks. > > PS are there archives on pistons, cams, hubs? > > Also I have tinkered with bikes for at least 40 years and used to build and > race rally cars and have quite a bit of knowledge there on dual cam four > valve cylinders. Used to get very torquey usable power at about 54 (at wheel) > hp from 500cc per cylinder using, among a few other things, 45/48 mm carbs > (one choke per cylinder). Peak HP used to be around 7000. OK I know these > were 4cyl engines but they must breath the same > > > > Visit the KLR650 archives at > http://www.listquest.com/lq/search.html?ln=klr650 > Support Dual Sport News... dsneditor@... > Let's keep this list SPAM free! > > Visit our site at http://www.egroups.com/group/DSN_klr650 > To unsubscribe from this group, send an email to: > DSN_klr650-unsubscribe@egroups.com > > >