[dsn_klr650] seat removal

[John Lyon]

Ralph, It is super easy. Take you side racks off (2 hex bolts each) take off both side panels (2 Phillips head screws per side) and take off the seat (2 10mm bolts, one on each side of the seat) John

On Sat, 1 Jul 2000 17:29:12 -0400, Ralph E. Hanson wrote: Collective, How easy/difficult is it to remove the seat from an A13 with Original Tim Racks on it? Any advice before I dive in? I'm going to be mounting my Ortlieb Dry bags with the straps under the seat. Ralph Ralph E. Hanson 99 KRL 650 http://www.wvu.edu/~journal2 John M. Lyon, III _______________________________________________________ Say Bye to Slow Internet! http://www.home.com/xinbox/signup.html

[Jeffrey L. Walker]

> > I've got the pro-grip gels on and they seem to be awfully sticky. Almost > like the gel isn't entirely internal. Anybody else have this happen? I

used

> wd40 to mount them so it ain't excess glue comin' thru. > > dat brooklyn bum >

Yeah, my pro-gels are sticky too, but I don't notice it with gloves on. WD-40??? Don't your grips slip around on the bars? Jeff