attn: if you have a web site ... (nklr)

DSN_KLR650
Post Reply
Justin Painter
Posts: 4
Joined: Thu Jun 22, 2000 9:06 pm

leaking drain plug

Post by Justin Painter » Thu Jun 22, 2000 10:06 pm

I recently purchased a A4 w/8K miles and after I changed the oil it has had a oil leak out the drain plug. I drained the oil back out, and went to my local Kawa dealer and asked for a new drain plug grommet. The guy looked it up and gave me a little O-Ring. I went home, and put the thing back together with the new O-Ring and it still leaks. After searching the Archives a bit I notice there is something called a "Crush washer" made of aluminum. I don't think I have one, or at least if I did it fell into the old oil during the first change and I don't have it anymore. Do the O-Ring and the Crush washer work in tandem or did the jerk at the Kawa shop (who was irritated I was interrupting his sandwich to begin with) give me the wrong thing? Justin Painter

Russell Scott
Posts: 1083
Joined: Thu Apr 06, 2000 6:16 pm

attn: if you have a web site ... (nklr)

Post by Russell Scott » Sat Jun 24, 2000 5:18 pm

And want a link to it from CalPosse.com, please send me a message with your web site name and URL. I would also if possible like a link on your site. Call the link "Home of the Cal Posse". The URL is http://www.calposse.com/. Russel'r

Post Reply

Who is online

Users browsing this forum: No registered users and 21 guests