[dsn_klr650] strange and unusual nklr

[A13rider@aol.com]

I have a Craftsman, 1/2 inch drive, 6 point, 27mm socket that I purchased at the local Sears about a year ago. If you absolutely cannot get a 27mm then a 1-1/16" socket is within 0.04" of being 27mm. Jim-A13-Cocoa

[Fred Hink]

----- Original Message ----- From: "Mike Magier" To: "KLR650 List" DSN_klr650@egroups.com> Sent: Saturday, April 08, 2000 2:02 AM Subject: [DSN_klr650] sprocket nut > WOW - going to replace front sprocket - looks like 27 mm!!??** Am I right? I > don't own one of those, and even my local Sears showed me in their catalog, > sears DOESN'T EVEN MAKE ONE!! What's everyone doing about this nut? My local > Carquest would be happy to sell me a 27 mm combi wrench for $35!! I'm only > going to need it this once! What to do?? > MM Try a 1 1/16" or 1 1/8" socket. I forget which. One of these will work. Fred

[ATO137528@aol.com]

I had top get a dealer to use an impact wrench to break mine loose. No problem with the stocker FALLING off! I got a 1 1/16" to fit. Those are easier to find. Lamar

[Todd & Angel]

[i]Imagine doing an endo with that on the bike?  You'd never stop rolling, LOL[/i] [i]Todd[/i]  

----- Original Message ----- [b]From:[/b] klr_a4@... [b]To:[/b] DSN_klr650@egroups.com [b]Sent:[/b] Saturday, April 08, 2000 11:23 AM [b]Subject:[/b] Re: [DSN_klr650] Strange and unusual NKLR Research and design for Ca. Highway Patrol? So top secret they can't test it in the California market. I heard it was  a joint project by Mike Corbin/NASA and Andy Goldfine and will be sold under the Unobtainium trademark. Conall >From: k650dsn@... >Reply-To: DSN_klr650@egroups.com >To: DSN_klr650@egroups.com >Subject: [DSN_klr650] Strange and unusual   NKLR >Date: Fri, 7 Apr 2000 16:59:52 EDT > >This week I saw the most bizarre motorcycle accessory ever. On Wednsday, I >saw a Goldwing and K1200LT pulling onto the Interstate. They each had this >huge windshield that arced up and over the rider's head.  If the rider look >straight a their 11 o'clock, they would be looking through the top of the >windshield. Today I saw the same two bikes, this time they had rear >windshields attached also. The appeared to be attached to a frame mounted >to the rear trunk.  These rear windhields arced and met the front >windshield above the rider's head.  Both days were quite breezy and both >times they were getting on the Interstate.  They had California plates.  >Both riders >were in Aerostitch suits and had some writing on the back, but I could not >read it.  My guess is that they may be testing these in windy conditions as >soon to be released products or something of that nature.  Has anyone ever >heard of anyting like this available >touring bikes?  It just seems really strange. > >Gino ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com [img]https://ec.yimg.com/ec?url=http%3A%2F%2Fadimg.egroups.com%2Fimg%2F2990%2F3%2F_%2F_%2F_%2F955214607%2Fnumber101.gif&t=1571716552&sig=ys0Jj.4f92ETOx3C.XDSDg--~E[/img] Visit the KLR650 archives at http://www.listquest.com/lq/search.html?ln=klr650 Support Dual Sport News... dsneditor@... Let's keep this list SPAM free! Visit our site at http://www.egroups.com/group/DSN_klr650 To unsubscribe from this group, send an email to: DSN_klr650-unsubscribe@egroups.com