lean surge after airbox mod?

DSN_KLR650
dumbazz650
Posts: 457
Joined: Sat Mar 29, 2003 10:18 pm

lean surge after airbox mod?

Post by dumbazz650 » Tue Apr 13, 2004 1:03 am

--- In DSN_klr650@yahoogroups.com, "steve_rolfeca" wrote:
> My bike started hunting at around 55mph in top gear, after I did
the
> popular airbox lid mod. > > The bike runs AOK above or below this speed, and if I open the > throttle slightly while it is hunting, it accelerates smoothly and > strongly. > > I suspect that turbulent air coming through the new opening might
be
> upsetting the mixture at small throttle settings. > > My bike only has about 8,000km on it, and has been well-maintained. > > The intake and exhaust are stock, except for a pilot jet adjustment > (about a 1/2 turn more than stock) and a shim under the needle. > Prior to opening up the airbox lid, the bike was running a hair > rich, as evidenced by soot buildup on the rear fender. > > Has anyone else experienced this? If so, have they tried putting a > dam around the opening, to smooth the airflow? What jetting do > people run with the stock exhaust and an open airbox? >
I'd would suspect a lean condition, and recommend the KLX needle, collar, and e-clip. It's easily adjustable and the taper is IHMO much better that the stocker. It's working for me Barbie Bike. Total parts were about $23 via ronayers.com, and the part-numbers are IN THE FAQ. Thank you Doc Krok! MarkB

Post Reply

Who is online

Users browsing this forum: No registered users and 24 guests