Re: Finger Light Push Rods
-
- Posts: 4
- Joined: Mon Nov 24, 2014 5:44 am
Finger Light Push Rods
I was wondering if someone can suggest what to use for the finger light push rods. I have a Norm S. brain cup and cam. The push rod holes are 3mm. Also what is done to prevent damade to the cam contact surface?
Steve
Steve
-
- Posts: 548
- Joined: Sat Sep 16, 2006 4:36 pm
Re: Finger Light Push Rods
Are you sure on that Steve? I have Normans's brain up and the holes measure approximately 7mm. I've used 6mm alumium tube for the finger light rods.
Steve
Steve
-
- Posts: 548
- Joined: Sat Sep 16, 2006 4:36 pm
Re: Finger Light Push Rods
Sorry Steve, complete, completely misread your question. For the push gods I used 1/8" stainless steel rod, fits perfectly.
Steve
Steve
-
- Posts: 84
- Joined: Wed Dec 18, 2013 10:08 pm
Re: Finger Light Push Rods
Thanks Steve,
Did you file the ends of the push rods rounded and smooth?
Steve
On Wednesday, 20 January 2016, 18:50, "stevejbrown007@gmail.com [B9Builders]" wrote:
Sorry Steve, complete, completely misread your question. For the push gods I used 1/8" stainless steel rod, fits perfectly.
Steve
#ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619 -- #ygrps-yiv-117419431yiv9268870619ygrp-mkp { border:1px solid #d8d8d8;font-family:Arial;margin:10px 0;padding:0 10px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-mkp hr { border:1px solid #d8d8d8;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-mkp #ygrps-yiv-117419431yiv9268870619hd { color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px 0;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-mkp #ygrps-yiv-117419431yiv9268870619ads { margin-bottom:10px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-mkp .ygrps-yiv-117419431yiv9268870619ad { padding:0 0;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-mkp .ygrps-yiv-117419431yiv9268870619ad p { margin:0;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-mkp .ygrps-yiv-117419431yiv9268870619ad a { color:#0000ff;text-decoration:none;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-sponsor #ygrps-yiv-117419431yiv9268870619ygrp-lc { font-family:Arial;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-sponsor #ygrps-yiv-117419431yiv9268870619ygrp-lc #ygrps-yiv-117419431yiv9268870619hd { margin:10px 0px;font-weight:700;font-size:78%;line-height:122%;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-sponsor #ygrps-yiv-117419431yiv9268870619ygrp-lc .ygrps-yiv-117419431yiv9268870619ad { margin-bottom:10px;padding:0 0;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619actions { font-family:Verdana;font-size:11px;padding:10px 0;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619activity { background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619activity span { font-weight:700;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619activity span:first-child { text-transform:uppercase;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619activity span a { color:#5085b6;text-decoration:none;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619activity span span { color:#ff7900;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619activity span .ygrps-yiv-117419431yiv9268870619underline { text-decoration:underline;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 .ygrps-yiv-117419431yiv9268870619attach { clear:both;display:table;font-family:Arial;font-size:12px;padding:10px 0;width:400px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 .ygrps-yiv-117419431yiv9268870619attach div a { text-decoration:none;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 .ygrps-yiv-117419431yiv9268870619attach img { border:none;padding-right:5px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 .ygrps-yiv-117419431yiv9268870619attach label { display:block;margin-bottom:5px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 .ygrps-yiv-117419431yiv9268870619attach label a { text-decoration:none;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 blockquote { margin:0 0 0 4px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 .ygrps-yiv-117419431yiv9268870619bold { font-family:Arial;font-size:13px;font-weight:700;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 .ygrps-yiv-117419431yiv9268870619bold a { text-decoration:none;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 dd.ygrps-yiv-117419431yiv9268870619last p a { font-family:Verdana;font-weight:700;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 dd.ygrps-yiv-117419431yiv9268870619last p span { margin-right:10px;font-family:Verdana;font-weight:700;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 dd.ygrps-yiv-117419431yiv9268870619last p span.ygrps-yiv-117419431yiv9268870619yshortcuts { margin-right:0;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 div.ygrps-yiv-117419431yiv9268870619attach-table div div a { text-decoration:none;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 div.ygrps-yiv-117419431yiv9268870619attach-table { width:400px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 div.ygrps-yiv-117419431yiv9268870619file-title a, #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 div.ygrps-yiv-117419431yiv9268870619file-title a:active, #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 div.ygrps-yiv-117419431yiv9268870619file-title a:hover, #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 div.ygrps-yiv-117419431yiv9268870619file-title a:visited { text-decoration:none;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 div.ygrps-yiv-117419431yiv9268870619photo-title a, #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 div.ygrps-yiv-117419431yiv9268870619photo-title a:active, #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 div.ygrps-yiv-117419431yiv9268870619photo-title a:hover, #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 div.ygrps-yiv-117419431yiv9268870619photo-title a:visited { text-decoration:none;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 div#ygrps-yiv-117419431yiv9268870619ygrp-mlmsg #ygrps-yiv-117419431yiv9268870619ygrp-msg p a span.ygrps-yiv-117419431yiv9268870619yshortcuts { font-family:Verdana;font-size:10px;font-weight:normal;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 .ygrps-yiv-117419431yiv9268870619green { color:#628c2a;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 .ygrps-yiv-117419431yiv9268870619MsoNormal { margin:0 0 0 0;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 o { font-size:0;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619photos div { float:left;width:72px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619photos div div { border:1px solid #666666;height:62px;overflow:hidden;width:62px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619photos div label { color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619reco-category { font-size:77%;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619reco-desc { font-size:77%;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 .ygrps-yiv-117419431yiv9268870619replbq { margin:4px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-actbar div a:first-child { margin-right:2px;padding-right:5px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-mlmsg { font-size:13px;font-family:Arial, helvetica, clean, sans-serif;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-mlmsg table { font-size:inherit;font:100%;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-mlmsg select, #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 input, #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 textarea { font:99% Arial, Helvetica, clean, sans-serif;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-mlmsg pre, #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 code { font:115% monospace;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-mlmsg * { line-height:1.22em;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-mlmsg #ygrps-yiv-117419431yiv9268870619logo { padding-bottom:10px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-msg p a { font-family:Verdana;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-msg p#ygrps-yiv-117419431yiv9268870619attach-count span { color:#1E66AE;font-weight:700;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-reco #ygrps-yiv-117419431yiv9268870619reco-head { color:#ff7900;font-weight:700;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-reco { margin-bottom:20px;padding:0px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-sponsor #ygrps-yiv-117419431yiv9268870619ov li a { font-size:130%;text-decoration:none;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-sponsor #ygrps-yiv-117419431yiv9268870619ov li { font-size:77%;list-style-type:square;padding:6px 0;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-sponsor #ygrps-yiv-117419431yiv9268870619ov ul { margin:0;padding:0 0 0 8px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-text { font-family:Georgia;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-text p { margin:0 0 1em 0;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-text tt { font-size:120%;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-vital ul li:last-child { border-right:none !important;} #ygrps-yiv-117419431
Did you file the ends of the push rods rounded and smooth?
Steve
On Wednesday, 20 January 2016, 18:50, "stevejbrown007@gmail.com [B9Builders]" wrote:
Sorry Steve, complete, completely misread your question. For the push gods I used 1/8" stainless steel rod, fits perfectly.
Steve
#ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619 -- #ygrps-yiv-117419431yiv9268870619ygrp-mkp { border:1px solid #d8d8d8;font-family:Arial;margin:10px 0;padding:0 10px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-mkp hr { border:1px solid #d8d8d8;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-mkp #ygrps-yiv-117419431yiv9268870619hd { color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px 0;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-mkp #ygrps-yiv-117419431yiv9268870619ads { margin-bottom:10px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-mkp .ygrps-yiv-117419431yiv9268870619ad { padding:0 0;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-mkp .ygrps-yiv-117419431yiv9268870619ad p { margin:0;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-mkp .ygrps-yiv-117419431yiv9268870619ad a { color:#0000ff;text-decoration:none;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-sponsor #ygrps-yiv-117419431yiv9268870619ygrp-lc { font-family:Arial;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-sponsor #ygrps-yiv-117419431yiv9268870619ygrp-lc #ygrps-yiv-117419431yiv9268870619hd { margin:10px 0px;font-weight:700;font-size:78%;line-height:122%;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-sponsor #ygrps-yiv-117419431yiv9268870619ygrp-lc .ygrps-yiv-117419431yiv9268870619ad { margin-bottom:10px;padding:0 0;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619actions { font-family:Verdana;font-size:11px;padding:10px 0;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619activity { background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619activity span { font-weight:700;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619activity span:first-child { text-transform:uppercase;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619activity span a { color:#5085b6;text-decoration:none;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619activity span span { color:#ff7900;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619activity span .ygrps-yiv-117419431yiv9268870619underline { text-decoration:underline;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 .ygrps-yiv-117419431yiv9268870619attach { clear:both;display:table;font-family:Arial;font-size:12px;padding:10px 0;width:400px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 .ygrps-yiv-117419431yiv9268870619attach div a { text-decoration:none;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 .ygrps-yiv-117419431yiv9268870619attach img { border:none;padding-right:5px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 .ygrps-yiv-117419431yiv9268870619attach label { display:block;margin-bottom:5px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 .ygrps-yiv-117419431yiv9268870619attach label a { text-decoration:none;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 blockquote { margin:0 0 0 4px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 .ygrps-yiv-117419431yiv9268870619bold { font-family:Arial;font-size:13px;font-weight:700;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 .ygrps-yiv-117419431yiv9268870619bold a { text-decoration:none;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 dd.ygrps-yiv-117419431yiv9268870619last p a { font-family:Verdana;font-weight:700;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 dd.ygrps-yiv-117419431yiv9268870619last p span { margin-right:10px;font-family:Verdana;font-weight:700;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 dd.ygrps-yiv-117419431yiv9268870619last p span.ygrps-yiv-117419431yiv9268870619yshortcuts { margin-right:0;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 div.ygrps-yiv-117419431yiv9268870619attach-table div div a { text-decoration:none;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 div.ygrps-yiv-117419431yiv9268870619attach-table { width:400px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 div.ygrps-yiv-117419431yiv9268870619file-title a, #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 div.ygrps-yiv-117419431yiv9268870619file-title a:active, #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 div.ygrps-yiv-117419431yiv9268870619file-title a:hover, #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 div.ygrps-yiv-117419431yiv9268870619file-title a:visited { text-decoration:none;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 div.ygrps-yiv-117419431yiv9268870619photo-title a, #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 div.ygrps-yiv-117419431yiv9268870619photo-title a:active, #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 div.ygrps-yiv-117419431yiv9268870619photo-title a:hover, #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 div.ygrps-yiv-117419431yiv9268870619photo-title a:visited { text-decoration:none;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 div#ygrps-yiv-117419431yiv9268870619ygrp-mlmsg #ygrps-yiv-117419431yiv9268870619ygrp-msg p a span.ygrps-yiv-117419431yiv9268870619yshortcuts { font-family:Verdana;font-size:10px;font-weight:normal;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 .ygrps-yiv-117419431yiv9268870619green { color:#628c2a;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 .ygrps-yiv-117419431yiv9268870619MsoNormal { margin:0 0 0 0;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 o { font-size:0;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619photos div { float:left;width:72px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619photos div div { border:1px solid #666666;height:62px;overflow:hidden;width:62px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619photos div label { color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619reco-category { font-size:77%;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619reco-desc { font-size:77%;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 .ygrps-yiv-117419431yiv9268870619replbq { margin:4px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-actbar div a:first-child { margin-right:2px;padding-right:5px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-mlmsg { font-size:13px;font-family:Arial, helvetica, clean, sans-serif;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-mlmsg table { font-size:inherit;font:100%;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-mlmsg select, #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 input, #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 textarea { font:99% Arial, Helvetica, clean, sans-serif;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-mlmsg pre, #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 code { font:115% monospace;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-mlmsg * { line-height:1.22em;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-mlmsg #ygrps-yiv-117419431yiv9268870619logo { padding-bottom:10px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-msg p a { font-family:Verdana;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-msg p#ygrps-yiv-117419431yiv9268870619attach-count span { color:#1E66AE;font-weight:700;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-reco #ygrps-yiv-117419431yiv9268870619reco-head { color:#ff7900;font-weight:700;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-reco { margin-bottom:20px;padding:0px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-sponsor #ygrps-yiv-117419431yiv9268870619ov li a { font-size:130%;text-decoration:none;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-sponsor #ygrps-yiv-117419431yiv9268870619ov li { font-size:77%;list-style-type:square;padding:6px 0;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-sponsor #ygrps-yiv-117419431yiv9268870619ov ul { margin:0;padding:0 0 0 8px;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-text { font-family:Georgia;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-text p { margin:0 0 1em 0;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-text tt { font-size:120%;} #ygrps-yiv-117419431 #ygrps-yiv-117419431yiv9268870619 #ygrps-yiv-117419431yiv9268870619ygrp-vital ul li:last-child { border-right:none !important;} #ygrps-yiv-117419431
-
- Posts: 164
- Joined: Fri Jul 01, 2011 11:08 am
Re: Finger Light Push Rods
Steve,
Go to any hobby shop and get styrene rods. They are easy to cut. Round the top with sand paper put a little grease on the cam and you're good to go.
David H
---- "steveneal351@yahoo.com.au [B9Builders]" wrote:
Go to any hobby shop and get styrene rods. They are easy to cut. Round the top with sand paper put a little grease on the cam and you're good to go.
David H
---- "steveneal351@yahoo.com.au [B9Builders]" wrote:
> I was wondering if someone can suggest what to use for the finger light push rods. I have a Norm S. brain cup and cam. The push rod holes are 3mm. Also what is done to prevent damade to the cam contact surface?
>
>
> Steve
-
- Posts: 408
- Joined: Tue Aug 25, 2015 2:09 pm
Re: Finger Light Push Rods
Good morning!
Sorry for being off the grid but I should be back in a few weeks.
I did want to share the following, an empty pen if taken apart has where the ink goes in. I took a Pilot pen and cut it but not knowing the lenght needed, I let it fall through the hole to hit bottom an cut it flat to the surface.
Considering the force, it should never buckle and it is hallow in case you ever need that forr anything such as to add weight or reinforce. David aka Toblueis
recommened a LED and a 3mm fits fine if the lower lip is trimmed. It provides a nice curve and polished surface for contact.
If you place a LED, remember the straw is hollow and you could try to power the LED Pimp my B9 lol.
Metal rods could be ok but it is stronger than the cam and the material of the finger so over time it should wear or show sign.
I am waiting to get my "fingers" to test it out. If you look at the solution presented it is a puece of engineering that is today cheap or free and we recycle.
Enjoy!
Sorry for being off the grid but I should be back in a few weeks.
I did want to share the following, an empty pen if taken apart has where the ink goes in. I took a Pilot pen and cut it but not knowing the lenght needed, I let it fall through the hole to hit bottom an cut it flat to the surface.
Considering the force, it should never buckle and it is hallow in case you ever need that forr anything such as to add weight or reinforce. David aka Toblueis

If you place a LED, remember the straw is hollow and you could try to power the LED Pimp my B9 lol.
Metal rods could be ok but it is stronger than the cam and the material of the finger so over time it should wear or show sign.
I am waiting to get my "fingers" to test it out. If you look at the solution presented it is a puece of engineering that is today cheap or free and we recycle.

Enjoy!
On Wed, Jan 20, 2016 at 12:19 AM, steveneal351@yahoo.com.au [B9Builders] wrote:
I was wondering if someone can suggest what to use for the finger light push rods. I have a Norm S. brain cup and cam. The push rod holes are 3mm. Also what is done to prevent damade to the cam contact surface?
Steve
-
- Posts: 548
- Joined: Sat Sep 16, 2006 4:36 pm
Re: Finger Light Push Rods
I have just rounded the ends slightly so there is no sharp edges.
Steve
Steve
-
- Posts: 386
- Joined: Wed Jul 09, 2003 8:44 pm
Re: Finger Light Push Rods
Attachments : For the cam push rods, Mike Joyce used 1/8" x 1 1/8" Stainless Steel dowel pins that have slightly beveled ends. McMaser-Carr Part# 90145A882. These will work with the Norman Brain Cups and cams. Delrin, which the cams are made from, is a very dense and sturdy material. It has a naturally slick surface which makes it excellent for moving parts such as this. I am certain Mike felt that wear would not be an issue with the Stainless Steel push rods. I do think rounding the ends and polishing to a very smooth finish would be a good idea.
[img]cid:7.1.0.9.2.20160120202638.0a26fa58@bex.net.0[/img]
For my own robot I used 1/4" Delrin rod, and rounded over the cam ends. Delrin is very dense, and naturally "slippery" material which makes it a great solution for moving parts like this. My Brain Cup is an early version with 1/4" push rod holes (as apposed to Norman's 1/8"). My cam is made of resin with embedded graphite.
[img]cid:7.1.0.9.2.20160120202638.0a26fa58@bex.net.1[/img] [img]cid:7.1.0.9.2.20160120202638.0a26fa58@bex.net.2[/img]
Craig
At 06:38 AM 1/20/2016, you wrote:
[img]cid:7.1.0.9.2.20160120202638.0a26fa58@bex.net.0[/img]
For my own robot I used 1/4" Delrin rod, and rounded over the cam ends. Delrin is very dense, and naturally "slippery" material which makes it a great solution for moving parts like this. My Brain Cup is an early version with 1/4" push rod holes (as apposed to Norman's 1/8"). My cam is made of resin with embedded graphite.
[img]cid:7.1.0.9.2.20160120202638.0a26fa58@bex.net.1[/img] [img]cid:7.1.0.9.2.20160120202638.0a26fa58@bex.net.2[/img]
Craig
At 06:38 AM 1/20/2016, you wrote:
Good morning!
Sorry for being off the grid but I should be back in a few weeks.
I did want to share the following, an empty pen if taken apart has where the ink goes in. I took a Pilot pen and cut it but not knowing the lenght needed, I let it fall through the hole to hit bottom an cut it flat to the surface.
Considering the force, it should never buckle and it is hallow in case you ever need that forr anything such as to add weight or reinforce. David aka Toblueisrecommened a LED and a 3mm fits fine if the lower lip is trimmed. It provides a nice curve and polished surface for contact.
If you place a LED, remember the straw is hollow and you could try to power the LED Pimp my B9 lol.
Metal rods could be ok but it is stronger than the cam and the material of the finger so over time it should wear or show sign.
I am waiting to get my "fingers" to test it out. If you look at the solution presented it is a puece of engineering that is today cheap or free and we recycle.
Enjoy!
I was wondering if someone can suggest what to use for the finger light push rods. I have a Norm S. brain cup and cam. The push rod holes are 3mm. Also what is done to prevent damade to the cam contact surface?
Steve
-
- Posts: 84
- Joined: Wed Dec 18, 2013 10:08 pm
Re: Finger Light Push Rods
Thanks for all the advise guys, oh and sorry for the late reply
Steve
On Thursday, 21 January 2016, 12:37, "Craig Reinbrecht craig@bex.net [B9Builders]" wrote:
For the cam push rods, Mike Joyce used 1/8" x 1 1/8" Stainless Steel dowel pins that have slightly beveled ends. McMaser-Carr Part# 90145A882. These will work with the Norman Brain Cups and cams. Delrin, which the cams are made from, is a very dense and sturdy material. It has a naturally slick surface which makes it excellent for moving parts such as this. I am certain Mike felt that wear would not be an issue with the Stainless Steel push rods. I do think rounding the ends and polishing to a very smooth finish would be a good idea.
For my own robot I used 1/4" Delrin rod, and rounded over the cam ends. Delrin is very dense, and naturally "slippery" material which makes it a great solution for moving parts like this. My Brain Cup is an early version with 1/4" push rod holes (as apposed to Norman's 1/8"). My cam is made of resin with embedded graphite.
Craig
At 06:38 AM 1/20/2016, you wrote:
Steve
On Thursday, 21 January 2016, 12:37, "Craig Reinbrecht craig@bex.net [B9Builders]" wrote:
For the cam push rods, Mike Joyce used 1/8" x 1 1/8" Stainless Steel dowel pins that have slightly beveled ends. McMaser-Carr Part# 90145A882. These will work with the Norman Brain Cups and cams. Delrin, which the cams are made from, is a very dense and sturdy material. It has a naturally slick surface which makes it excellent for moving parts such as this. I am certain Mike felt that wear would not be an issue with the Stainless Steel push rods. I do think rounding the ends and polishing to a very smooth finish would be a good idea.
For my own robot I used 1/4" Delrin rod, and rounded over the cam ends. Delrin is very dense, and naturally "slippery" material which makes it a great solution for moving parts like this. My Brain Cup is an early version with 1/4" push rod holes (as apposed to Norman's 1/8"). My cam is made of resin with embedded graphite.
Craig
At 06:38 AM 1/20/2016, you wrote:
#ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170 -- #ygrps-yiv-829901565yiv3116803170ygrp-mkp { border:1px solid #d8d8d8;font-family:Arial;margin:10px 0;padding:0 10px;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170ygrp-mkp hr { border:1px solid #d8d8d8;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170ygrp-mkp #ygrps-yiv-829901565yiv3116803170hd { color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px 0;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170ygrp-mkp #ygrps-yiv-829901565yiv3116803170ads { margin-bottom:10px;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170ygrp-mkp .ygrps-yiv-829901565yiv3116803170ad { padding:0 0;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170ygrp-mkp .ygrps-yiv-829901565yiv3116803170ad p { margin:0;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170ygrp-mkp .ygrps-yiv-829901565yiv3116803170ad a { color:#0000ff;text-decoration:none;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170ygrp-sponsor #ygrps-yiv-829901565yiv3116803170ygrp-lc { font-family:Arial;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170ygrp-sponsor #ygrps-yiv-829901565yiv3116803170ygrp-lc #ygrps-yiv-829901565yiv3116803170hd { margin:10px 0px;font-weight:700;font-size:78%;line-height:122%;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170ygrp-sponsor #ygrps-yiv-829901565yiv3116803170ygrp-lc .ygrps-yiv-829901565yiv3116803170ad { margin-bottom:10px;padding:0 0;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170actions { font-family:Verdana;font-size:11px;padding:10px 0;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170activity { background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170activity span { font-weight:700;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170activity span:first-child { text-transform:uppercase;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170activity span a { color:#5085b6;text-decoration:none;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170activity span span { color:#ff7900;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170activity span .ygrps-yiv-829901565yiv3116803170underline { text-decoration:underline;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 .ygrps-yiv-829901565yiv3116803170attach { clear:both;display:table;font-family:Arial;font-size:12px;padding:10px 0;width:400px;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 .ygrps-yiv-829901565yiv3116803170attach div a { text-decoration:none;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 .ygrps-yiv-829901565yiv3116803170attach img { border:none;padding-right:5px;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 .ygrps-yiv-829901565yiv3116803170attach label { display:block;margin-bottom:5px;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 .ygrps-yiv-829901565yiv3116803170attach label a { text-decoration:none;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 blockquote { margin:0 0 0 4px;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 .ygrps-yiv-829901565yiv3116803170bold { font-family:Arial;font-size:13px;font-weight:700;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 .ygrps-yiv-829901565yiv3116803170bold a { text-decoration:none;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 dd.ygrps-yiv-829901565yiv3116803170last p a { font-family:Verdana;font-weight:700;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 dd.ygrps-yiv-829901565yiv3116803170last p span { margin-right:10px;font-family:Verdana;font-weight:700;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 dd.ygrps-yiv-829901565yiv3116803170last p span.ygrps-yiv-829901565yiv3116803170yshortcuts { margin-right:0;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 div.ygrps-yiv-829901565yiv3116803170attach-table div div a { text-decoration:none;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 div.ygrps-yiv-829901565yiv3116803170attach-table { width:400px;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 div.ygrps-yiv-829901565yiv3116803170file-title a, #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 div.ygrps-yiv-829901565yiv3116803170file-title a:active, #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 div.ygrps-yiv-829901565yiv3116803170file-title a:hover, #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 div.ygrps-yiv-829901565yiv3116803170file-title a:visited { text-decoration:none;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 div.ygrps-yiv-829901565yiv3116803170photo-title a, #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 div.ygrps-yiv-829901565yiv3116803170photo-title a:active, #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 div.ygrps-yiv-829901565yiv3116803170photo-title a:hover, #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 div.ygrps-yiv-829901565yiv3116803170photo-title a:visited { text-decoration:none;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 div#ygrps-yiv-829901565yiv3116803170ygrp-mlmsg #ygrps-yiv-829901565yiv3116803170ygrp-msg p a span.ygrps-yiv-829901565yiv3116803170yshortcuts { font-family:Verdana;font-size:10px;font-weight:normal;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 .ygrps-yiv-829901565yiv3116803170green { color:#628c2a;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 .ygrps-yiv-829901565yiv3116803170MsoNormal { margin:0 0 0 0;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 o { font-size:0;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170photos div { float:left;width:72px;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170photos div div { border:1px solid #666666;height:62px;overflow:hidden;width:62px;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170photos div label { color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170reco-category { font-size:77%;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170reco-desc { font-size:77%;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 .ygrps-yiv-829901565yiv3116803170replbq { margin:4px;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170ygrp-actbar div a:first-child { margin-right:2px;padding-right:5px;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170ygrp-mlmsg { font-size:13px;font-family:Arial, helvetica, clean, sans-serif;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170ygrp-mlmsg table { font-size:inherit;font:100%;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170ygrp-mlmsg select, #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 input, #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 textarea { font:99% Arial, Helvetica, clean, sans-serif;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170ygrp-mlmsg pre, #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 code { font:115% monospace;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170ygrp-mlmsg * { line-height:1.22em;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170ygrp-mlmsg #ygrps-yiv-829901565yiv3116803170logo { padding-bottom:10px;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170ygrp-msg p a { font-family:Verdana;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170ygrp-msg p#ygrps-yiv-829901565yiv3116803170attach-count span { color:#1E66AE;font-weight:700;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170ygrp-reco #ygrps-yiv-829901565yiv3116803170reco-head { color:#ff7900;font-weight:700;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170ygrp-reco { margin-bottom:20px;padding:0px;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170ygrp-sponsor #ygrps-yiv-829901565yiv3116803170ov li a { font-size:130%;text-decoration:none;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170ygrp-sponsor #ygrps-yiv-829901565yiv3116803170ov li { font-size:77%;list-style-type:square;padding:6px 0;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170ygrp-sponsor #ygrps-yiv-829901565yiv3116803170ov ul { margin:0;padding:0 0 0 8px;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170ygrp-text { font-family:Georgia;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170ygrp-text p { margin:0 0 1em 0;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170ygrp-text tt { font-size:120%;} #ygrps-yiv-829901565 #ygrps-yiv-829901565yiv3116803170 #ygrps-yiv-829901565yiv3116803170ygrp-vital ul li:last-child { border-right:none !important;} #ygrps-yiv-829901565
Good morning!
Sorry for being off the grid but I should be back in a few weeks.
I did want to share the following, an empty pen if taken apart has where the ink goes in. I took a Pilot pen and cut it but not knowing the lenght needed, I let it fall through the hole to hit bottom an cut it flat to the surface.
Considering the force, it should never buckle and it is hallow in case you ever need that forr anything such as to add weight or reinforce. David aka Toblueisrecommened a LED and a 3mm fits fine if the lower lip is trimmed. It provides a nice curve and polished surface for contact.
If you place a LED, remember the straw is hollow and you could try to power the LED Pimp my B9 lol.
Metal rods could be ok but it is stronger than the cam and the material of the finger so over time it should wear or show sign.
I am waiting to get my "fingers" to test it out. If you look at the solution presented it is a puece of engineering that is today cheap or free and we recycle.
Enjoy!
I was wondering if someone can suggest what to use for the finger light push rods. I have a Norm S. brain cup and cam. The push rod holes are 3mm. Also what is done to prevent damade to the cam contact surface?
Steve
-
- Posts: 408
- Joined: Tue Aug 25, 2015 2:09 pm
Re: Finger Light Push Rods
No worries on my end
a reply is better than no replie
.
Perhaps you can share pictures and / or video of the assembly of the light fingers. Once I get my items I plan on doing one and sharing. As long as I dont forget lol...


Perhaps you can share pictures and / or video of the assembly of the light fingers. Once I get my items I plan on doing one and sharing. As long as I dont forget lol...
On Fri, Jan 22, 2016 at 8:01 PM, Steve Neal steveneal351@yahoo.com.au [B9Builders] wrote:
Thanks for all the advise guys, oh and sorry for the late reply
Steve
On Thursday, 21 January 2016, 12:37, "Craig Reinbrecht craig@bex.net [B9Builders]" wrote:
For the cam push rods, Mike Joyce used 1/8" x 1 1/8" Stainless Steel dowel pins that have slightly beveled ends. McMaser-Carr Part# 90145A882. These will work with the Norman Brain Cups and cams. Delrin, which the cams are made from, is a very dense and sturdy material. It has a naturally slick surface which makes it excellent for moving parts such as this. I am certain Mike felt that wear would not be an issue with the Stainless Steel push rods. I do think rounding the ends and polishing to a very smooth finish would be a good idea.
For my own robot I used 1/4" Delrin rod, and rounded over the cam ends. Delrin is very dense, and naturally "slippery" material which makes it a great solution for moving parts like this. My Brain Cup is an early version with 1/4" push rod holes (as apposed to Norman's 1/8"). My cam is made of resin with embedded graphite.
Craig
At 06:38 AM 1/20/2016, you wrote:
Good morning!
Sorry for being off the grid but I should be back in a few weeks.
I did want to share the following, an empty pen if taken apart has where the ink goes in. I took a Pilot pen and cut it but not knowing the lenght needed, I let it fall through the hole to hit bottom an cut it flat to the surface.
Considering the force, it should never buckle and it is hallow in case you ever need that forr anything such as to add weight or reinforce. David aka Toblueisrecommened a LED and a 3mm fits fine if the lower lip is trimmed. It provides a nice curve and polished surface for contact.
If you place a LED, remember the straw is hollow and you could try to power the LED Pimp my B9 lol.
Metal rods could be ok but it is stronger than the cam and the material of the finger so over time it should wear or show sign.
I am waiting to get my "fingers" to test it out. If you look at the solution presented it is a puece of engineering that is today cheap or free and we recycle.
Enjoy!
I was wondering if someone can suggest what to use for the finger light push rods. I have a Norm S. brain cup and cam. The push rod holes are 3mm. Also what is done to prevent damade to the cam contact surface?
Steve
Who is online
Users browsing this forum: No registered users and 8 guests