How do you suggest the round column posts for the 3 top lights be attached to your polished brain top? Is is stainless steel?
Herb
Sent from my iPad
On Mar 10, 2018, at 9:45 AM, Craig Reinbrecht craig@bex.net [B9Builders] wrote:
Hi All,
OK, BRAIN parts have been ordered and this project is a go! A big thanks to all who responded and helped make this run possible. Below is a list of everyone who responded. If you still want in on this run and you do not see your name below, please send me a
private email to craig@bex.net.
A couple things to note... First, I will not be able to offer the polished mirrored tops separately for a variety of reasons. Most importantly is that it is doubtful it will fit any other B9 brain and these are extremely difficult to trim with destroying. How
do I know that... guess
Next, I want you all to know that the brains will be EXPERTLY assembled by none other than former B9Creations employee,
Greg Logue! Yes, Greg assembled over 60 of these brains during his professional Robot building career! Has anyone else on the planet assembled that many B9 Brains?? So when I say
expertly assembled... I am not kidding!
Here are the folks who responded in the order I received the request. So, as the brains are built they will be offered to the people on the top then I will go down the list as they are completed. This will most likely be in the May time frame.
Reed Franklin
K Campton (KC)
Gregorio Padin
Ron Murray
Herb Carpiniello
Shane Schaffner
Braun (BJ) M (AU)
Ken Parker
Daniel Angel
Robert Sheehan
Mike Hayes
Ray Wilson
Fred
Tim Kusz
Roman Hoshowsky
Robert Rossi
Paul Johansson
Andy Brescia
Chip Hollon
Thanks again,
Craig
At 10:44 AM 3/9/2018, you wrote:
Craig,
I didn t see if you confirmed, will you be able to supply the mirrored finish brain top by itself, and if so, does it need any kind of coating like a clear coat to maintain the finish?
Sent from my iPad
On Mar 4, 2018, at 10:15 AM, Craig Reinbrecht craig@bex.net [B9Builders] wrote:
No.
At 11:07 PM 3/3/2018, you wrote:
Any chance on getting those made for a Trendmasters 2ft Tall R/C B9?
On Saturday, March 3, 2018, 7:38:00 PM EST, Craig Reinbrecht craig@bex.net [B9Builders] wrote:
Hi Ray,
What is your last name so I can get you recorded completely?
Thanks,
Craig
At 01:54 PM 2/27/2018, you wrote:
Hi Craig, I would be interested in a Brain, Thanks, Ray
On Monday, February 26, 2018, 8:42:59 PM EST, Craig Reinbrecht craig@bex.net [B9Builders] wrote:
Bob,
It should! ... but let me know.
Craig
At 08:16 PM 2/26/2018, you wrote:
Hi Craig,
I may be interested in just the highly polished stainless steel top as I don't know if the brain I got from you has one.
I will have to dig and check it.
Bob Jaconetti
B9-0663
On Feb 26, 2018 8:04 PM, "Craig Reinbrecht craig@bex.net [B9Builders]" wrote:
> Continuing the wave of exciting parts announcements... .....I would like to find out how many builders would be interested in a high quality laser cut steel BRAIN, which would come expertly assembled and primed and ready to paint. It does get much better than that!
It would also include a polished, mirrored stainless steel top (very hard to photograph, by the way, lol)
The price would be $235 plus shipping. They would be ready in the May - June time frame. (time to recover from your recent claw purchase
)If interested... Please reply and let me know. I am not looking for an iron clad commitment or any money down right now, but I do want to know if you want in on this run, and likely to buy. I plan to pull the trigger on this tomorrow if there is enough
interest Thanks, Craig
[url=http://www.avg...com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient]
[/url][url=http://www.avg...com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient] [/url]
[url=http://www.avg...com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient]
[/url][url=http://www.avg...com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient][/url]Virus-free.
[url=http://www.avg...com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient]
www.avg.com[/url]
Content-Type: image/jpeg; name="3ecbd94c.jpg"; x-mac-type=4A504547; x-mac-creator=4A565752
Content-Disposition: inline; filename="3ecbd94c.jpg"
Content-ID:
X-Attachment-Id: 6fb937b5d3d1dcac_0.1
Content-Type: image/jpeg; name="3ecbd95b.jpg"; x-mac-type=4A504547; x-mac-creator=4A565752
Content-Disposition: inline; filename="3ecbd95b.jpg"
Content-ID:
X-Attachment-Id: 6fb937b5d3d1dcac_0.2
Content-Type: image/jpeg; name="3ecbd97b.jpg"; x-mac-type=4A504547; x-mac-creator=4A565752
Content-Disposition: inline; filename="3ecbd97b.jpg"
Content-ID:
X-Attachment-Id: 6fb937b5d3d1dcac_0.4
Content-Type: image/jpeg; name="3ecbd96b.jpg"; x-mac-type=4A504547; x-mac-creator=4A565752
Content-Disposition: inline; filename="3ecbd96b.jpg"
Content-ID:
X-Attachment-Id: 6fb937b5d3d1dcac_0.3
[/url] [url=http://www.avg...com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient] [/url] [url=http://www.avg...com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient] [/url][url=http://www.avg...com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient] [/url]Virus-free. [url=http://www.avg...com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient] 
[/url] [url=http://www.avg...com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient] [/url] [url=http://www.avg...com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient] [/url][url=http://www.avg...com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient] [/url]Virus-free. [url=http://www.avg...com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient] 
[/url] [url=http://www.avg...com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient] [/url] [url=http://www.avg...com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient] [/url][url=http://www.avg...com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient] [/url]Virus-free. [url=http://www.avg...com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient]