tc spring camber

Post Reply
the_wizard_o_cheese
Posts: 2
Joined: Sat Oct 30, 2010 11:14 am

tc spring camber

Post by the_wizard_o_cheese » Wed Apr 03, 2002 8:06 am

Having trouble finding the proper camber for front and rear springs for the tc. I'm trying to get reworked my spare spring set. Iwould appreciate any info. tc49@aol.com
Top
Chip Old
Posts: 206
Joined: Thu Jan 20, 2000 6:57 am

Re: tc spring camber

Post by Chip Old » Wed Apr 03, 2002 8:25 am

On Wed, 3 Apr 2002, TC49@aol.com wrote:
> Having trouble finding the proper camber for front and rear springs for > the tc. I'm trying to get reworked my spare spring set. Iwould > appreciate any info. tc49@aol.com
The specs are in Blower's book. If nobody else responds, I'll post them this evening. -- Chip Old 1948 M.G. TC TC6710 XPAG7430 NEMGTR #2271 Cub Hill, Maryland 1962 Triumph TR4 CT3154LO CT3479E fold@bcpl.net
Top
CFritz7001@aol.com
Posts: 129
Joined: Mon May 14, 2001 1:58 pm

Re: tc spring camber

Post by CFritz7001@aol.com » Wed Apr 03, 2002 10:21 am

According to the W.E. Blower book (The MG Manual -- 3rd Edition, 1953): TC front springs have 1.85 in. camber (flat at 500 to 520 lbs.) TC rear springs have 1.687 in. camber ( flat at 385 lbs.) Regards, Carl Fritz TC # 6756 (Betsy) VA # 2009 S (Abigail) Gainesville, Florida
Top
Frank O_ The Mountain
Posts: 233
Joined: Thu Dec 25, 2008 3:02 pm

Re: tc spring camber

Post by Frank O_ The Mountain » Wed Apr 03, 2002 11:04 am

In a message dated 4/3/02 08:08:39 Pacific Standard Time, TC49@aol.com writes: > This info is in the back of the Blowers Manual...... Terry
Top
Post Reply

Return to “MGATA”

Who is online

Users browsing this forum: No registered users and 17 guests