MPJG DK4A A35 Distributor.

[Roger Muir]

Dear All. I am trying to track down a DK4A A35 Distributor for my MPJG engine. Hopefully from a UK source. Failing that, has anyone experience they could pass on to me for the renovation of this distributor. Bushes should be easy enough to get my local machine shop to make up for me, however what is the correct material to use. Does any one know the correct specifications for the advance springs and a supplier? Any other tips? Hopefully Roger Muir Bromsgrove UK

[erwin.lifestyle@t-online.de]

Try ringing Holden on UK 01.885.488.488 and speak to Colin. Not the cheapest, but always been very helpful in the past. Regards Brian Chase -----Urspr ngliche Nachricht----- Von: Roger Muir rogermuir@compuserve.com> An: MG Groups mg-tabc@yahoogroups.com> Gesendet: Dienstag, 5. Juni 2001 09:41 Betreff: [mg-tabc] MPJG DK4A A35 Distributor.

> > > > Dear All. > > I am trying to track down a DK4A A35 Distributor for my MPJG engine. > Hopefully from a UK source. > > Failing that, has anyone experience they could pass on to me for the > renovation of this distributor. > > > Bushes should be easy enough to get my local machine shop to make up for > me, however what is the correct material to use. > > Does any one know the correct specifications for the advance springs and a > supplier? > > Any other tips? > > Hopefully > > Roger Muir Bromsgrove UK > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > >