engine seize
-
- Posts: 1
- Joined: Tue Apr 15, 2008 8:03 pm
sad ebay listing, must say goodbye !
Hello to everyone !
Back in '03 my son gave me his Kawasaki EX500 to ride for the season
and I had a great time being on two wheels again. I had some issues
with that bike; foot pegs, not where I like them non-adjustable
handlebars. I loved the engine; amazed at how fast a 500cc could be.
If Kawasaki had made a bike with that engine and set up like a 650
Bonny I would have bought it in 2003. Over the winter I started doing
research to find out which bike I was going to buy in 2004. Having
owned a Triumph 650 in the `70s, I wanted something around the same
weight and power. In the 80s I had purchased a Suzuki 650 Savage and
put 900 miles on it, breaking it in for the wife, I owned a BMW R100
at the time. I was impressed with the power of the 650 single. Back
to winter research . Seating position, adjustable handlebars, foot
peg location, weight, 650cc single, price and the same model made
since the 80s; the KLR 650 was looking like a good choice. I spent
many hours on the "klr650.net" forum reading about KLR issues and how
they could be customized and decided to get one. Great group of people
on that site.
Because of the forum I was an informed consumer and got a great deal,
60 miles from home.
I started customizing it soon after I got it home. This machine was
intended for 100% road use and NYC driving, which some might consider
off road [read potholes]. Lowering it was first ! ! Driving home from
the dealer I hade a laugh at every stoplight when I put my feet down
and didn't make contact with the ground as usual, toes only. Next
were the handlebars too wide for the city, the mirrors, relocated to
the faring made the bike slim enough [29"] to fit almost anywhere.
The Break-in was a real test of patience but it was worth doing it
right. I changed the "DOO" shortly after break-in and street tires
made a big difference in the ride. Other Mods included "Progressive
Suspension" Fork Springs, "Happy Trails" - K-9 Fork Brace, Low Front
Fender, Lowering Links, Shortened Side Stand with a larger footprint,
stronger Shift Lever.
Carb. Modification.
I fabricated a `Vertical Headlight Adjustment' from outside the
faring, using a long 6mm Allen wrench and a special adjusting bolt.
I was very pleased with the results of the transformation from Dual
Sport to City Sport.
I had other Mods planned, but then the medical problems started with
the right hip and the left wrist and left elbow; operating the clutch
becomes painful after 75+ shifts.
I never intended to sell this machine, especially after the successful
transformation; I thought I would ride it to motorcycle heaven one
day. Looks like, if I'm going to ride on two wheels, it's going to be
a maxi-scooter.
With a heavy heart, I placed her on eBay. She needs someone who will
take her out more often. I will miss her.
Still has a year to go on the Kawasaki Good Times Protection Plan -
Expires 5/15/2009............
http://img379.imageshack.us/img379/1025/fender4ii9.jpg
eBay --- Item number: 260230802063
Thanks for the time and keep safe !
Tom
-
- Posts: 1727
- Joined: Wed Nov 26, 2003 3:07 pm
sad ebay listing, must say goodbye !
--- In DSN_KLR650@yahoogroups.com, "thomaspaul1925"
wrote:
doing> > Hello to everyone ! > > Back in '03 my son gave me his Kawasaki EX500 to ride for the season > and I had a great time being on two wheels again. I had some issues > with that bike; foot pegs, not where I like them non-adjustable > handlebars. I loved the engine; amazed at how fast a 500cc could be. > If Kawasaki had made a bike with that engine and set up like a 650 > Bonny I would have bought it in 2003. Over the winter I started
and> research to find out which bike I was going to buy in 2004. Having > owned a Triumph 650 in the `70s, I wanted something around the same > weight and power. In the 80s I had purchased a Suzuki 650 Savage
how> put 900 miles on it, breaking it in for the wife, I owned a BMW R100 > at the time. I was impressed with the power of the 650 single. Back > to winter research . Seating position, adjustable handlebars, foot > peg location, weight, 650cc single, price and the same model made > since the 80s; the KLR 650 was looking like a good choice. I spent > many hours on the "klr650.net" forum reading about KLR issues and
people> they could be customized and decided to get one. Great group of
deal,> on that site. > Because of the forum I was an informed consumer and got a great
was> 60 miles from home. > I started customizing it soon after I got it home. This machine
consider> intended for 100% road use and NYC driving, which some might
from> off road [read potholes]. Lowering it was first ! ! Driving home
to> the dealer I hade a laugh at every stoplight when I put my feet down > and didn't make contact with the ground as usual, toes only. Next > were the handlebars too wide for the city, the mirrors, relocated
Front> the faring made the bike slim enough [29"] to fit almost anywhere. > The Break-in was a real test of patience but it was worth doing it > right. I changed the "DOO" shortly after break-in and street tires > made a big difference in the ride. Other Mods included "Progressive > Suspension" Fork Springs, "Happy Trails" - K-9 Fork Brace, Low
footprint,> Fender, Lowering Links, Shortened Side Stand with a larger
bolt.> stronger Shift Lever. > Carb. Modification. > I fabricated a `Vertical Headlight Adjustment' from outside the > faring, using a long 6mm Allen wrench and a special adjusting
clutch> > I was very pleased with the results of the transformation from Dual > Sport to City Sport. > I had other Mods planned, but then the medical problems started with > the right hip and the left wrist and left elbow; operating the
successful> becomes painful after 75+ shifts. > I never intended to sell this machine, especially after the
be> transformation; I thought I would ride it to motorcycle heaven one > day. Looks like, if I'm going to ride on two wheels, it's going to
Tom, Have you considered the new auttomatic REKLUSE clutch for the KLR. There was recent discussion, and it is for sale by 'FRED'. The video was awesome. I don't think they even used the clutch to put it in gear. There is a u-tube video as well. google and find it. Just a thought. http://www.angelfire.com/ut/moab/parts_frames.html Rekluse z-Start Pro Automatic Clutch PIC 20-4404 z-Start Pro All KLR650 699.95 Premium Auto Clutch 30 day Money Back Guarantee INFO revmaaatin.> a maxi-scooter. > With a heavy heart, I placed her on eBay. She needs someone who will > take her out more often. I will miss her. > > Still has a year to go on the Kawasaki Good Times Protection Plan - > Expires 5/15/2009............ > > http://img379.imageshack.us/img379/1025/fender4ii9.jpg > > eBay --- Item number: 260230802063 > > Thanks for the time and keep safe ! > Tom >
-
- Posts: 3355
- Joined: Sat Dec 15, 2001 3:37 pm
engine seize
Alright 3 rd attempt... @#$@#%$!%@ laptop keep loosing signal last
night.
4x4 electrical box that has rounded corners, get a cover that fits
it, if you use a rounded corner of the cover it acts as a screwdriver
for that large plastic plug on the engines left side. Basically just
peaking into the locked up engine looking for signs of damage.
This same device stays on the bike in a ATV handlebar pouch I picked
up, and I use that cover as a kickstand plate when parking on soft
stuff.
Dooden
A15 Green Ape
--- In DSN_KLR650@yahoogroups.com, Horton Oliphant
wrote:
Voodoo> > I wondered about that myself! Some kind of electro mechanical
cover> perhaps? Al A13 IA > > Richard A. Butler wrote: > > What is this?... > > > > " heck might even get a > > clue by sticking a corner of a rounded corner 4x4 electrical box
seconds."> > on the side of the motor and see its a mess, only takes a few
Please> > > > Ive been a wrench for decades but have somehow missed this one.
> > help me to understand how it works. > > I'll go back to lurking now, thanks a bunch. > > uflated >
-
- Posts: 184
- Joined: Fri Jan 25, 2008 11:43 am
sad ebay listing, must say goodbye !
That's exactly what I was going to suggest. Great minds think alike?
I had a lot of trouble with one hip with the stock seat and built my own
that's quite a bit wider than stock. It's not perfect but my hip doesn't
bother me anymore. Alan A13 Iowa
revmaaatin wrote:

> Tom, > Have you considered the new auttomatic REKLUSE clutch for the KLR. > There was recent discussion, and it is for sale by 'FRED'. The video > was awesome. I don't think they even used the clutch to put it in > gear. There is a u-tube video as well. google and find it. > > Just a thought. > http://www.angelfire.com/ut/moab/parts_frames.html > Rekluse z-Start Pro Automatic Clutch PIC 20-4404 z-Start Pro All > KLR650 699.95 Premium Auto Clutch 30 day Money Back Guarantee INFO > > revmaaatin. > >
Who is online
Users browsing this forum: No registered users and 24 guests