2007 klr650 in jacksonville

DSN_KLR650
Post Reply
gregorio ames
Posts: 1
Joined: Mon Apr 14, 2008 7:28 am

engine seize

Post by gregorio ames » Mon Apr 14, 2008 8:28 am

last night i was out for an sunset ride on a dirt road when my engine suddenly seized. i was going about thirty mph in fourth gear, did not hear any noise, nor notice that the bike was heating up. it is full of oil and coolant. it is a 2002 klr 650 with only 2100 miles on it. i was wondering if it could be the doohickey? if it is what is the likely damage? if it is something else what could it be? thanks gregorio

hrrmphf
Posts: 1
Joined: Mon Apr 14, 2008 7:33 am

engine seize

Post by hrrmphf » Mon Apr 14, 2008 8:33 am

last night i was out for an sunset ride on a dirt road when my engine suddenly seized. i was going about thirty mph in fourth gear, did not hear any noise, nor notice that the bike was heating up. it is full of oil and coolant. it is a 2002 klr 650 with only 2100 miles on it. i was wondering if it could be the doohickey? if it is what is the likely damage? if it is something else what could it be? thanks gregorio

Spike55
Posts: 267
Joined: Thu May 11, 2006 2:22 pm

engine seize

Post by Spike55 » Mon Apr 14, 2008 10:10 am

You'll have to do some investigative work (start tearing things down) to determine what the problem is and/or to ask for meaningful help. If it wasn't making noise before the problem then a doohickey failure could have happened. Do you have a magnetic oil pan drain plug? Look for chunks of metal and if it looks "doo-like" then you could assume the doohickey let lose and this could represent a big problem if the cam timing chain jammed up and stopped. The chain could be damaged, the valves could have gotten out of time with the piston and broke something. Go to the grocery store and buy a bunch of disposable type aluminum cooking pans (big parts and to hold all parts associated with that sub-assembly) and tupperware-like containers (smaller parts of the sub-assembly). Start on the left side of the motor. If you don't think you can put it back together properly, at least you have all of the parts sorted into the sub-assembly groups, and a mechanic can put it back together at less expense. Don R100, A6F
--- In DSN_KLR650@yahoogroups.com, gregorio ames wrote: > > > last night i was out for an sunset ride on a dirt road > when my engine suddenly seized. i was going about > thirty mph in fourth gear, did not hear any noise, nor > notice that the bike was heating up. it is full of oil > and coolant. it is a 2002 klr 650 with only 2100 miles > on it. i was wondering if it could be the doohickey? > if it is what is the likely damage? if it is something > else what could it be? > > thanks > gregorio >

Jeff Saline
Posts: 2246
Joined: Fri Oct 10, 2003 6:02 pm

engine seize

Post by Jeff Saline » Mon Apr 14, 2008 10:36 am

On Mon, 14 Apr 2008 15:10:14 -0000 "Spike55" writes: SNIP If you don't think you can put it back together properly, at least you have all of the parts sorted into the sub-assembly groups, and a mechanic can put it back together at less expense. Don R100, A6F <><><><><><><><><><> <><><><><><><><><><> Don, May I just interject that as a mechanic that used to get paid to work... I never wanted to reassemble something that someone else took apart. I've done it but it usually isn't fun. I suggest if you don't think you can put it back together you don't take it apart. I remember seeing a sign in a shop that had the going rates for work. It said something like: Hourly labor rate $xx If you watch, 1 1/2 times the hourly rate. If you've worked on it and now we've got to work on it 2 times the hourly rate. I think they'd let you help work on it for 3 times the hourly rate. Just my 2 cents worth. Best, Jeff Saline ABC # 4412 South Dakota Airmarshal Airheads Beemer Club www.airheads.org The Beautiful Black Hills of South Dakota 75 R90/6, 03 KLR650, 79 R100RT

albatrossklr
Posts: 163
Joined: Sun Sep 02, 2007 7:15 am

engine seize

Post by albatrossklr » Mon Apr 14, 2008 10:46 am

I'm not a mechanic but whole heartedly agree with Jeff. albatross who understands the value of seeing the problem fresh
--- In DSN_KLR650@yahoogroups.com, Jeff Saline wrote: > > On Mon, 14 Apr 2008 15:10:14 -0000 "Spike55" > writes: > > SNIP > > If you don't think you can put it back together properly, at least you > have all of the parts sorted into the sub-assembly groups, and a mechanic > can put it back together at less expense. > > Don R100, A6F > <><><><><><><><><><> > <><><><><><><><><><> > > Don, > > May I just interject that as a mechanic that used to get paid to work... > I never wanted to reassemble something that someone else took apart. > I've done it but it usually isn't fun. > > I suggest if you don't think you can put it back together you don't take > it apart. > > I remember seeing a sign in a shop that had the going rates for work. It > said something like: > > Hourly labor rate $xx > > If you watch, 1 1/2 times the hourly rate. > > If you've worked on it and now we've got to work on it 2 times the hourly > rate. > > I think they'd let you help work on it for 3 times the hourly rate. > > Just my 2 cents worth. > > Best, > > Jeff Saline > ABC # 4412 South Dakota Airmarshal > Airheads Beemer Club www.airheads.org > The Beautiful Black Hills of South Dakota > 75 R90/6, 03 KLR650, 79 R100RT >

Michael Nelson
Posts: 151
Joined: Tue Jul 17, 2007 5:55 am

engine seize

Post by Michael Nelson » Mon Apr 14, 2008 11:25 am

On Mon, Apr 14, 2008 at 03:46:30PM -0000, albatrossklr wrote:
> I'm not a mechanic but whole heartedly agree with Jeff.
I was one and I agree too. Michael -- "Tragedy is when I cut my finger. Comedy is when you fall into an open manhole and die." -- Mel Brooks San Francisco, CA

dooden
Posts: 3355
Joined: Sat Dec 15, 2001 3:37 pm

engine seize

Post by dooden » Tue Apr 15, 2008 2:03 am

AS a former Service Manager at a Powersports dealer... I Whole Heartly Agree with Jeff also.. Easy to open up little bits and check for simple things, many how to's on the web that show how to: Example check valve clearance, just stop at the removing of the cover, so you can see down the chain and see if its all piled up or still on the cam sprockets, heck might even get a clue by sticking a corner of a rounded corner 4x4 electrical box cover on the side of the motor and see its a mess, only takes a few seconds. If your not a wrench turner, well load it up and drop it off at a dealer, pay them to diag. the problem and ask for a quote for repairs, have them show ya the "Flat Rate" for the repair. ;-) Dooden A15 Green Ape --- In DSN_KLR650@yahoogroups.com, Michael Nelson wrote:
> > On Mon, Apr 14, 2008 at 03:46:30PM -0000, albatrossklr wrote: > > I'm not a mechanic but whole heartedly agree with Jeff. > > I was one and I agree too. > > Michael > > -- > "Tragedy is when I cut my finger. Comedy is when you fall into an
open
> manhole and die." -- Mel Brooks > > San Francisco, CA >

Richard A. Butler
Posts: 18
Joined: Fri Jan 12, 2007 8:17 am

engine seize

Post by Richard A. Butler » Tue Apr 15, 2008 8:56 am

What is this?... " heck might even get a clue by sticking a corner of a rounded corner 4x4 electrical box cover on the side of the motor and see its a mess, only takes a few seconds." Ive been a wrench for decades but have somehow missed this one. Please help me to understand how it works. I'll go back to lurking now, thanks a bunch. uflated

Horton Oliphant
Posts: 184
Joined: Fri Jan 25, 2008 11:43 am

engine seize

Post by Horton Oliphant » Tue Apr 15, 2008 9:53 am

I wondered about that myself! Some kind of electro mechanical Voodoo perhaps? Al A13 IA Richard A. Butler wrote:
> What is this?... > > " heck might even get a > clue by sticking a corner of a rounded corner 4x4 electrical box cover > on the side of the motor and see its a mess, only takes a few seconds." > > Ive been a wrench for decades but have somehow missed this one. Please > help me to understand how it works. > I'll go back to lurking now, thanks a bunch. > uflated

Bob Monahan
Posts: 41
Joined: Wed May 18, 2005 6:52 pm

2007 klr650 in jacksonville

Post by Bob Monahan » Wed Apr 16, 2008 5:55 am

I was cruising the net and ran across this low mileage (3K) KLR in Jacksonville. It's a 2007 model and their asking price is only $3,999. Not too bad eh? $bob$ [Non-text portions of this message have been removed]

Post Reply

Who is online

Users browsing this forum: No registered users and 28 guests