for sale - 2001 kawasaki klr650 dual-sport - $2800

[Pascal Le Pesant]

Thanks for the answer but you don't really answer to my question. Maybe my english is not really clear (I first language is french...). I am looking precisely at the position of the "J" shaped plate which fasten the lowest bolt. Hope my question is clearer. Pascal -----Original Message----- From: W.V. Doran [mailto:wonholly@...] Sent: 30 mai 2005 12:59 To: Pascal Le Pesant Subject: Re: [DSN_KLR650] Upperengine mount Pascal...Facing forward (clutch lever on the left/brake lever on the right)It apears that the bolts go thru from the right side and the nuts attach from the left side. I'll take a look at mine and see for sure. If I don't repost it's correct. --- Pascal Le Pesant wrote:

> There are two regular bolts and one bolt with a nut shaped as a "J". > Which side of the nut should I apply to the engine mount plate ? It is > not clear on the kawasaki part detail: > http://www.connexite.net/klr650/Engine_mount.GIF > > Thanks for your help. > > Pascal, Quebec, KLR 650 1996.

WVDoran Scottsdale, AZ __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

[mrlgrd]

5500 miles, new Dunlop D607 tires (80% street 20% off-road) - used only on-road. I bought the bike in September 2004 with 3700 miles, I am the third owner. I had the bike serviced at 4k miles at the local Kawasaki dealer. Always garaged - previous owners did some off-road with it (some branch scratches on platic parts) I added Top case and battery charger. Selling the bike because relocating abroad this summer. I am located in Shrewsbuy Massachusetts. Thanks. Chris.