craftsman m/c lift
-
- Posts: 19
- Joined: Wed May 22, 2002 10:59 pm
sun phoenix ride report
Started at 7:00AM, everyone was actually there. We had 2 KLR650s, 1 xl650
, 1 xt250. I was the only one riding 2 up. Followed Cave Creek road all
the way out. XL rider want to find his range (100 miles with a 1 liter bar
bottle)
The weather was perfect, we hit several light showers, almost had a Mule
Deer for lunch. The road was in very good condition with the exception of
the last 8 miles to the bridge. It was VERY rocky and loose.
Stats:
Odometer 132 miles
moving av 28 mph
overall 21 mph
max speed 60 mph
total time 6:09
stop time 1:26
Great time had by all, xt rider crashed and needs some plastic, xl rider
needed a gallon of gas from me. We are all sore, my wife says she will
never ride that far on dirt again. I just hurt.
We are planning another ride to Crown King from Lake Pleasent.
crazydave
BTW about 90 miles of the total was dirt roads.
------------------------------------------------
Join Excite! - http://www.excite.com
The most personalized portal on the Web!
[Non-text portions of this message have been removed]
-
- Posts: 19
- Joined: Wed May 22, 2002 10:59 pm
sun phoenix ride report
Bryan, whats the addy to the AZ dual Sports lists? Had major computer problems. Thanks
crazydave
--- On Mon 08/05, cactus_reese wrote: From: cactus_reese [mailto: cactus_reese@...] To: crazydave_2@... Date: Mon, 05 Aug 2002 21:04:56 -0000 Subject: Re: Sun Phoenix Ride Report > Sounds like a good ride. Who were the participants? Have you given up > on the AZ Dula Sport list? > -Bryan > A12 Tucson ------------------------------------------------ Join Excite! - http://www.excite.com The most personalized portal on the Web! [Non-text portions of this message have been removed]
-
- Posts: 102
- Joined: Sun Dec 02, 2001 7:07 pm
sun phoenix ride report
AZDS@yahoogroups.com
-----Original Message-----
From: crazydave_2@... [mailto:crazydave_2@...]
Sent: Monday, August 05, 2002 6:22 PM
To: DSN_klr650@yahoogroups.com
Subject: [DSN_klr650] Re: Sun Phoenix Ride Report
Bryan, whats the addy to the AZ dual Sports lists? Had major computer
problems. Thanks
crazydave
--- On Mon 08/05, cactus_reese wrote: From: cactus_reese [mailto: cactus_reese@...] To: crazydave_2@... Date: Mon, 05 Aug 2002 21:04:56 -0000 Subject: Re: Sun Phoenix Ride Report > Sounds like a good ride. Who were the participants? Have you given up > on the AZ Dula Sport list? > -Bryan > A12 Tucson ------------------------------------------------ Join Excite! - http://www.excite.com The most personalized portal on the Web! [Non-text portions of this message have been removed] Checkout Dual Sport News at http://www.dualsportnews.com List FAQ courtesy of Chris Krok at: http://www.bigcee.com/klr650faq.html Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
-
- Posts: 2434
- Joined: Thu Apr 06, 2000 10:08 am
craftsman m/c lift
Utah Sportcycle makes skid plates for just about everybody. The skid plates
made by Utah Sportcycle for the KLR does not have a flat bottom. It is bent
a couple of places to give the drain plug more clearance. It should still
work with your lifts but won't provide the wide steady base you are looking
for.
Fred
http://www.arrowheadmotorsports.com
http://www.canyonlandsmotorclassic.com
----- Original Message ----- From: "2Bon2Wheels" To: "Mark St.Hilaire, Sr" ; "DSN_klr650" DSN_klr650@yahoogroups.com> Sent: Friday, August 09, 2002 1:37 PM Subject: Re: [DSN_klr650] Craftsman M/C Lift > > I have the bash plate I bought from Fred Hink, > > (Moose plate?), and because I > > haven't had an official lift, I've just been using a > > floor jack with a large > > cup under the bash plate to get the whole bike up in > > the air for tire > > changes, or whatever. I'm sure that the bash plate > > would make the bike rock > > solid on the Sears lift - at least, I sure HOPE it > > does! > > > > Mark > > Mark, > Let me know if the bash plate does the job. If so I'll > probably have to buy one. I am looking at the one made > by Utah Sportcycles > (http://www.utahsportcycle.com/skplates.cfm) . > They make the bashplate for Dual-Star but modify the > design so that it will fit the Dual Star waterpump and > radiator shields. The guy's at Utah Sprotcycle said > there standard plate provides enough waterpump > protection in their view so that will be the one I > will probably get. > > Brad in NC > > __________________________________________________ > Do You Yahoo!? > HotJobs - Search Thousands of New Jobs > http://www.hotjobs.com > > Checkout Dual Sport News at > http://www.dualsportnews.com > List FAQ courtesy of Chris Krok at: http://www.bigcee.com/klr650faq.html > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > >
Who is online
Users browsing this forum: No registered users and 32 guests