Bradley's rear crank seal
Posted: Thu Mar 30, 2000 5:42 pm
Right you are, you appear to be the inventor. I did not measure Mikes
crank build-up but it looked visually larger than what appears on the
drawing on the TABC web site. He may be using a larger seal, but the
basic design is the same.
crank build-up but it looked visually larger than what appears on the
drawing on the TABC web site. He may be using a larger seal, but the
basic design is the same.
On Thu, 30 Mar 2000, Andy Bradley wrote:
> Just to set the record straight. I beleive that it was I, with the help of Don and Wayne at Don's Speed Shop in San
> Diego, that designed the Chevy rear oil seal conversion back in 1989. The drawings have been posted for a couple of
> years on the t-abc website. I have never tried to make any money off the thing, other that including it in engine jobs
> that I have done. But I would just like to see the credit go where it is due.
>
> And now, back to your regularly scheduled mailing list.
>
> --
> Cheers....Andy B.
> Bradley Restoration
>
>
>
> ------------------------------------------------------------------------
>
> eGroups.com home: http://www.egroups.com/group/mg-tabc
> http://www.egroups.com - Simplifying group communications
>
>
>
>
>