Re: XPAG rear seal modification

Post Reply
Glenda Nelson
Posts: 4
Joined: Sun Dec 19, 1999 1:27 am

XPAG rear seal modification

Post by Glenda Nelson » Fri Jan 07, 2000 1:11 am

Hi Everyone

I am reconditioning my xpag engine and I read with interest the rear main oil seal modification, written by Andy Bradley and listed in the Special Files on the T-ABCs web site.

As I have not previously heard of this particular conversion, I would be interested in some feedback from others who have used it, before I commit to the modification.


Cheers

Ian Nelson

Geoffrey WHEATLEY
Posts: 27
Joined: Thu Nov 25, 1999 8:38 am

Re: XPAG rear seal modification

Post by Geoffrey WHEATLEY » Fri Jan 07, 2000 4:51 am

Ian,
I tried this conversion a few weeks ago and it seems to be fine although
I have not had much chance to use the car .
The summer will be the big test .
We currently have about a foot of snow outside the workshop door so ask
me again in May!.
Good luck and a Happy New MG Year.

PS With all these modifications my theory is simple ...If I don't like
it you can always revert back to the original ...If that is not feasible
I don't bother

Regards Geoff

Post Reply

Who is online

Users browsing this forum: No registered users and 86 guests