Hi Everyone
I am reconditioning my xpag engine and I read with interest the rear main oil seal modification, written by Andy Bradley and listed in the Special Files on the T-ABCs web site.
As I have not previously heard of this particular conversion, I would be interested in some feedback from others who have used it, before I commit to the modification.
Cheers
Ian Nelson
Re: XPAG rear seal modification
-
- Posts: 27
- Joined: Thu Nov 25, 1999 8:38 am
Re: XPAG rear seal modification
Ian,
I tried this conversion a few weeks ago and it seems to be fine although
I have not had much chance to use the car .
The summer will be the big test .
We currently have about a foot of snow outside the workshop door so ask
me again in May!.
Good luck and a Happy New MG Year.
PS With all these modifications my theory is simple ...If I don't like
it you can always revert back to the original ...If that is not feasible
I don't bother
Regards Geoff
I tried this conversion a few weeks ago and it seems to be fine although
I have not had much chance to use the car .
The summer will be the big test .
We currently have about a foot of snow outside the workshop door so ask
me again in May!.
Good luck and a Happy New MG Year.
PS With all these modifications my theory is simple ...If I don't like
it you can always revert back to the original ...If that is not feasible
I don't bother
Regards Geoff
Who is online
Users browsing this forum: No registered users and 11 guests