Re: Altette Horn

[Steve S]

Hi Bill, there is no known issue with the site. It is regularly scanned both internally and externally for every known type of malware and virus and all reports are currently clean. There was a server attack some time ago that you may recall where our site (and many others) were briefly infected with malware but that has long since been remedied. Your scanner may not have removed its blacklist setting for the TABC site from back then. Rest assured the site is safe, and in fact is currently undergoing some content updates.

In the meantime I will check with various referrers to make sure no one has a false report on the site. Thanks for the heads up on that.

- Steve Simmons

On 10/30/2013 6:06 AM, Mark Robinson wrote:

Bill It's okay with BitDefender. Regards Mark TC4157
From: Bill Hyatt usaj24@earthlink.net
To: 'Steve S' mail@mgnuts.com; 'T-ABC' mg-tabc@yahoogroups.com
Sent: Wednesday, 30 October 2013, 12:41
Subject: RE: [mg-tabc] Altette Horn
Steve, When tried to enter the site below I received a notice that site contains a known threat & that site had been blocked as contains malicious content. Am using Web Root Security. Bill TC 4926 Odessa, Florida From: mg-tabc@yahoogroups.com [mg-tabc@yahoogroups.com] On Behalf Of Steve S
Sent: Tuesday, October 29, 2013 9:05 PM
To: mg-tabc@yahoogroups.com
Subject: [mg-tabc] Altette Horn I have just run across an Altette horn that looks identical to the one
on my TC, except that there is no depression in the rear. Other minor
differences are a single nut on front instead of double, and a thicker
mounting bracket. Otherwise they look the same.

Does anyone know what type of car this horn would be appropriate for?
Please see the following thread on our Discussion Forum for photos:

http://www.mg-tabc.org/forum/viewtopic.php?f=2&t=240

- Steve Simmons, TC8975

[arm@telus.net]

Greetings all!

My altette has been a lovely adornment for many, many years and I recently decided to try to get it functional. I d/l'd the altette service bulletin and quickly realized that mine is not the same as the ones discussed in the bulletin. The front looks correct but the rear is quite different. I have been pointed to "Taff The Horn" and have perused his site but haven't contacted him. Before I do a complete tear down I wondered if there was a specialist on this side of the pond. Any one know?

Further, I'd appreciate a photo of the BACK of a correct TC altette. I may contact TAFF to help me identify what I have and, if it comes to that have him repair or exchange. It's time to blow my own horn. (sorry, hehehe)

Cheers
Ross

[doug fromtheframeup.com]

HI ross,
 
Our shop rebuilds horns along with most all things, TC.  Send a photo of front and back to confirm ID.
 
Regards,
 

Doug Pelton
 
From The Frame Up
4064 E. Presidio St.  #104
Mesa, AZ  85215
480-588-8185
 
For fastest service:  order@fromtheframeup.com
Check out our website:  
www.FromTheFrameUp.com
Keep up to date with:     
FaceBook

 


From: mg-tabc@yahoogroups.com
On Behalf Of 'arm@telus.net' arm@telus.net [mg-tabc]
Sent: Friday, November 29, 2019 6:59 AM
To: mg-tabc
Subject: [mg-tabc] Altette Horn


 
 




Greetings all!

My altette has been a lovely adornment for many, many years and I recently decided to try to get it functional. I d/l'd the altette service bulletin and quickly realized that mine is not the same as the ones discussed in the bulletin. The front looks correct
but the rear is quite different. I have been pointed to "Taff The Horn" and have perused his site but haven't contacted him. Before I do a complete tear down I wondered if there was a specialist on this side of the pond. Any one know?

Further, I'd appreciate a photo of the BACK of a correct TC altette. I may contact TAFF to help me identify what I have and, if it comes to that have him repair or exchange. It's time to blow my own horn. (sorry, hehehe)

Cheers
Ross