Wilsons Sandbox

> My rear right road spring has lost its set, so that
> the car is not on an
> even keel when unloaded. Has any one had success
> (economical and mechanical)
> in having the road springs reset instead of
> replacing them? Both should be
> treated at the same time. Front sperings are good
> and straight when loaded.
>
> To what ratings should they be reset?
>
> I have not had them off the car, or partially
> disassembled, and do not (yet)
> know how worn they may be. What should I look out
> for?
>
>
> Regards,
>
> Robin Montgomery
> TC8330
> Connecticut, USA
> RMontgomery@doriandrake.com
> _________________________________
>
>
>
>
> Yahoo! Groups Links
>
>
> mg-tabc-unsubscribe@yahoogroups.com
>
>
>
>
>

> My rear right road spring has lost its set, so that
> the car is not on an
> even keel when unloaded. Has any one had success
> (economical and mechanical)
> in having the road springs reset instead of
> replacing them? Both should be
> treated at the same time. Front sperings are good
> and straight when loaded.
>
> To what ratings should they be reset?
>
> I have not had them off the car, or partially
> disassembled, and do not (yet)
> know how worn they may be. What should I look out
> for?
>
>
> Regards,
>
> Robin Montgomery
> TC8330
> Connecticut, USA
> RMontgomery@doriandrake.com
> _________________________________
>
>
>
>
> Yahoo! Groups Links
>
>
> mg-tabc-unsubscribe@yahoogroups.com
>
>
>
>
>

> FWIW fit new springs.

----- Original Message -----
From: "Jeff Redman"
To: "'ian thomson'"
Cc:
Sent: Monday, September 12, 2005 6:36 PM
Subject: RE: [mg-tabc] Road springs


> G'day Robin and Ian,
>
> FWIW fit new springs.
> Over the years I've had several sets supposedly reset, using several
> different spring specialists..... result: lots of disappointment.
> And as it turned out the cost difference between buying new to repair
> was not that much.
>
> Regards
>
> Jeff
>
> -----Original Message-----
> From: mg-tabc@yahoogroups.com [mailto:mg-tabc@yahoogroups.com] On Behalf
> Of ian thomson
> Sent: Tuesday, 13 September 2005 1:17 AM
> To: Robin Montgomery; mg-tabc@yahoogroups.com
> Subject: RE: [mg-tabc] Road springs
>
> I can't comment on resetting versus new but the spring
> details are all in blower.
>
> Ian Thomson
>
> -------
>
> --- Robin Montgomery
> wrote:
>
> > My rear right road spring has lost its set, so that
> > the car is not on an
> > even keel when unloaded. Has any one had success
> > (economical and mechanical)
> > in having the road springs reset instead of
> > replacing them? Both should be
> > treated at the same time. Front sperings are good
> > and straight when loaded.
> >
> > To what ratings should they be reset?
> >
> > I have not had them off the car, or partially
> > disassembled, and do not (yet)
> > know how worn they may be. What should I look out
> > for?
> >
> >
> > Regards,
> >
> > Robin Montgomery
> > TC8330
> > Connecticut, USA
> > RMontgomery@doriandrake.com
> > _________________________________
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> > mg-tabc-unsubscribe@yahoogroups.com
> >
> >
> >
> >
> >
>
>
>
>
> ___________________________________________________________
> How much free photo storage do you get? Store your holiday
> snaps for FREE with Yahoo! Photos http://uk.photos.yahoo.com
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>