Shock Bushes
Posted: Sun Sep 04, 2005 4:31 pm
I had the same trouble with keeping the bushes in the arm. So, I
cleaned all the "stuff" off with laquer thinner, lubed with a thin two
part epoxy, and they slid in just as easy. Cleaned them up with the
thinner, and the next day they stayed put when I finished assembly. I
imagine it will require a little more effort to replace them the next
time, but hey aren't going to come out in the mean time.
cleaned all the "stuff" off with laquer thinner, lubed with a thin two
part epoxy, and they slid in just as easy. Cleaned them up with the
thinner, and the next day they stayed put when I finished assembly. I
imagine it will require a little more effort to replace them the next
time, but hey aren't going to come out in the mean time.