TC Fuel Line Thread Size
Posted: Mon Aug 29, 2005 11:43 am
I plan to install an in line fuel filter purchased from Moss. However, I
prefer to install the filter without using rubber hose fittings. Can anyone
confirm the size of the braided fuel line to connect the AN-6 thread on the
Billet filter ? Earl's fitting PN 916106ERL has a AN-6adapter with a female
thread and a 1/4" NPT fitting but I am not sure if this is the correct
thread size.
Also, when I had my TC in for repairs I had the shop install a new Lucas
fuel pump. It worked till I got to my drive. I am not sure if the shop may
have reversed the two electrical connections when they installed the new
pump. Any suggestions would be appreciated.
Sincerely,
John
TC 6956
prefer to install the filter without using rubber hose fittings. Can anyone
confirm the size of the braided fuel line to connect the AN-6 thread on the
Billet filter ? Earl's fitting PN 916106ERL has a AN-6adapter with a female
thread and a 1/4" NPT fitting but I am not sure if this is the correct
thread size.
Also, when I had my TC in for repairs I had the shop install a new Lucas
fuel pump. It worked till I got to my drive. I am not sure if the shop may
have reversed the two electrical connections when they installed the new
pump. Any suggestions would be appreciated.
Sincerely,
John
TC 6956