Page 1 of 1
flexible oil lines
Posted: Thu Aug 25, 2005 11:02 am
by Greg Hoeft
Hi Group
There is an auction for a set of XPAG flexible oil lines. Does anybody know
who makes these?
Greg Hoeft
TC1415 "Venerable Vernette"
http://cgi.ebay.com/ebaymotors/MGTC-MG-TC-OIL-FILTER-HOSE-SET-FOR-EXTERNAL-OIL-FILTER_W0QQcmdZViewItemQQcategoryZ34202QQitemZ4571343270QQrdZ1
_________________________________________________________________
On the road to retirement? Check out MSN Life Events for advice on how to
get there!
http://lifeevents.msn.com/category.aspx?cid=Retirement
Re: flexible oil lines
Posted: Thu Aug 25, 2005 11:22 am
by Peter Roberts
Greg,
Take a hard look at the oil pump fitting that the line feeds into. That
does not look original..at least the bolt heads do not.
_Peter
Re: flexible oil lines
Posted: Thu Aug 25, 2005 11:26 am
by joecurto@aol.com
By Flexable oil lines I assume you mean the one that feeds from the engine to
the oil pressure gauge. Do not go to crazy bidding Moss sells a pretty nice
line for not a lot of money.
Joe curto
[Non-text portions of this message have been removed]
Re: flexible oil lines
Posted: Thu Aug 25, 2005 12:01 pm
by Gene Gillam
GReg asks:
>There is an auction for a set of XPAG flexible oil lines. Does anybody know who makes these?<
Greg,
John Seim (a member of this group) makes these lines. I purchased a set from him and am very happy with them.
Gene Gillam
Saucier, MS
Re: flexible oil lines
Posted: Thu Aug 25, 2005 9:21 pm
by Donald Wilkinson
Hi Group
There is an auction for a set of XPAG flexible oil lines. Does anybody know
who makes these?
Greg Hoeft
TC1415 "Venerable Vernette"
(eBay#4571343270)
digitaldon sez:
Hundred Fo(u)rty bucks? SHEESH................. make 'em yerself..........
7993 has haddem since 1957 or 8.......... got tired of the freeken solid
kind work hardening & fracturing.
Don
TC 7993
Re: flexible oil lines
Posted: Thu Aug 25, 2005 9:28 pm
by Donald Wilkinson
By Flexable oil lines I assume you mean the one that feeds from the engine
to
the oil pressure gauge. Do not go to crazy bidding Moss sells a pretty nice
line for not a lot of money.
Joe curto
Hey Joe................. digitaldon sez:................. not that one,
these replace the solid pipes from pump to filter, & filter to block.
Don
TC 7993
Re: flexible oil lines
Posted: Thu Aug 25, 2005 10:31 pm
by Britcar82@AOL.Com
They are made by John Seim. I have them on my car and they are of excellent
quality. I know that John spent a lot of time getting them right.
Sherman Kaplan
TC 6945
[Non-text portions of this message have been removed]
Re: flexible oil lines
Posted: Fri Aug 26, 2005 6:42 am
by John Seim
I have the flexible oil lines made to my specifications. A brass adapter
is bolted onto the oil pump top, allowing for a banjo connection to the
top of the oil pump. New banjo bolts are supplied, along with sealing
washers. As the old banjo bolts had a shoulder to center the hard lines
to the opening, they cannot be used with the new, flexible oil lines.
Stainless Steel braid over rubber hose, suitable for oil, and
temperatures that a normal operation XPAG engine will encounter.
John Seim
Irvine, CA
Greg Hoeft wrote:
Re: flexible oil lines
Posted: Fri Aug 26, 2005 7:54 am
by DougPulver@aol.com
I totally agree. I also have John's oil lines on my TC which I installed just prior to GOF West. They are excellent quality.
Doug Pulver
TC 5850 (which parked next to Sherman's TC 6945 at the GOF car show at Firestone Winery - we should have admired each other's hoses)
-----Original Message-----
From:
Britcar82@AOL.Com
To:
greghoeft@hotmail.com;
mg-tabc@yahoogroups.com
Sent: Fri, 26 Aug 2005 01:31:05 EDT
Subject: Re: [mg-tabc] flexible oil lines
They are made by John Seim. I have them on my car and they are of excellent
quality. I know that John spent a lot of time getting them right.
Sherman Kaplan
TC 6945
[Non-text portions of this message have been removed]
Yahoo! Groups Links
[Non-text portions of this message have been removed]