Re:

[Mark Stolzenburg]

Bob, At what RPM are you suggesting 50 to 60 psi hot? I take it you are suggesting the minimum 40 psi at idle? Mark Stolzenburg St. Louis, Missouri TC 7812

----- Original Message ----- From: "Bob Grunau" grunau.garage@sympatico.ca> To: "John Patterson" jwp_mgtc@chartermi.net>; "T-ABCs Forever" mg-tabc@yahoogroups.com> Sent: Monday, August 15, 2005 5:03 PM Subject: RE: [mg-tabc] > John, > I'd suggest using 20W-50 oil, 10W-30 is really too light for our XPAG > engines. Cold oil pressure should be about 70 psi. I like to see 50 to 60 > psi hot. My minimum hot pressure to run is 40 psi, but I hate to see it that > low. > Regards, Bob Grunau >