Page 1 of 1
Valve Guides
Posted: Mon Jul 25, 2005 4:50 pm
by Gene Gillam
Listers,
What's the recommended clearance when using the silicone bronze valve
guides? I believe that 0.003" is normal for the stock ones but believe
I've heard that the silicon guides require a tad bit more clearance to
allow for heat expansion.
Thanks,
Gene Gillam
Saucier, MS
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.338 / Virus Database: 267.9.4/57 - Release Date: 7/22/2005
Valve Guides
Posted: Thu Aug 09, 2012 10:48 am
by Jim Buell
Hi All I need to find a supplier for silicon bronze valve guides for a Laystall racing head. This is for my XPAG engine. Any and all help appreciated. Jim BuellTC9806Blanchard, ID 83804(208) 437-0804
gmparcr@lambgroupinc.net
Re: Valve Guides
Posted: Thu Aug 09, 2012 10:50 am
by Jose Vicente Vargas
Peter edney in the uk
Sent from my iPod
On 9/08/2012, at 12:48 p.m., "Jim Buell" gmparcr@lambgroupinc.net> wrote:
Hi All I need to find a supplier for silicon bronze valve guides for a Laystall racing head. This is for my XPAG engine. Any and all help appreciated. Jim BuellTC9806Blanchard, ID 83804(208) 437-0804
gmparcr@lambgroupinc.net
=
Re: Valve Guides
Posted: Fri Aug 10, 2012 6:58 am
by Joe Curto
My local shop made a set I believe from a Vega , we did mine in cast iron but I am sure they did them in bronze too If any interst that head when complete will be for sale Joe
-----Original Message-----
From: Jim Buell gmparcr@lambgroupinc.net>
To: mg-tabc mg-tabc@yahoogroups.com>; MGVR MGVR@yahoogroups.com>
Sent: Thu, Aug 9, 2012 1:48 pm
Subject: [mg-tabc] Valve Guides
Hi All I need to find a supplier for silicon bronze valve guides for a Laystall racing head. This is for my XPAG engine. Any and all help appreciated. Jim Buell TC9806 Blanchard, ID 83804 (208) 437-0804
gmparcr@lambgroupinc.net #ygrps-yiv-140013841 #ygrps-yiv-140013841AOLMsgPart_1_423e4648-4a8e-457e-801c-2e57bec0b642 td{color:black;}
Re: Valve Guides
Posted: Sat Aug 11, 2012 10:33 am
by i.thomson@talk21.com
Peter Burgess in UK.
http://www.mgcars.org.uk/peterburgess/
Ian Thomson (in UK)