Page 1 of 2
exhaust system
Posted: Wed Jun 22, 2005 6:13 am
by Jim and Shirley Mink
Does anyone have an words of wisdom regarding the Moss s/s exhaust system vs the Abingdon Spares set up? I have used Moss for our TF and was satisfied. Seems to be about a $200 price difference in favor of Moss. Jim
[Non-text portions of this message have been removed]
Re: exhaust system
Posted: Wed Jun 22, 2005 7:52 am
by fnitz
I have installed the Moss SS exhaust and am very happy with it. Don't know
about the Abingdon one.
Fred TC1353
-----Original Message-----
From:
mg-tabc@yahoogroups.com [mailto:
mg-tabc@yahoogroups.com] On Behalf Of
Jim and Shirley Mink
Sent: Wednesday, June 22, 2005 6:14 AM
To: mg-tabc
Subject: [mg-tabc] exhaust system
Does anyone have an words of wisdom regarding the Moss s/s exhaust system vs
the Abingdon Spares set up? I have used Moss for our TF and was satisfied.
Seems to be about a $200 price difference in favor of Moss. Jim
[Non-text portions of this message have been removed]
Yahoo! Groups Links
Re: exhaust system
Posted: Wed Jun 22, 2005 8:30 am
by Dave A
Hello!
I have also installed the Moss "Falcon" SS exhaust on my TC... Nice sound!
Fits good!
Dave 48' TC
-----Original Message-----
From:
mg-tabc@yahoogroups.com [mailto:
mg-tabc@yahoogroups.com]On Behalf
Of fnitz
Sent: Wednesday, June 22, 2005 7:52 AM
To: 'mg-tabc'
Subject: RE: [mg-tabc] exhaust system
I have installed the Moss SS exhaust and am very happy with it. Don't know
about the Abingdon one.
Fred TC1353
-----Original Message-----
From:
mg-tabc@yahoogroups.com [mailto:
mg-tabc@yahoogroups.com] On Behalf Of
Jim and Shirley Mink
Sent: Wednesday, June 22, 2005 6:14 AM
To: mg-tabc
Subject: [mg-tabc] exhaust system
Does anyone have an words of wisdom regarding the Moss s/s exhaust system vs
the Abingdon Spares set up? I have used Moss for our TF and was satisfied.
Seems to be about a $200 price difference in favor of Moss. Jim
[Non-text portions of this message have been removed]
Yahoo! Groups Links
Yahoo! Groups Links
Re: exhaust system
Posted: Wed Jun 22, 2005 5:55 pm
by Rick Waters
I have the Falcon SS system, and aside from a bit of tweaking where the head pipe flange bolts to the Bell housing, it fit perfectly, and sounds very nice.I did not, however, buy it from Moss, but rather from a local supplier here in Vancouver.
-Rick
Dave A davea@symbolicdisplays.com> wrote:
Hello!
I have also installed the Moss "Falcon" SS exhaust on my TC... Nice sound!
Fits good!
Dave 48' TC
-----Original Message-----
From:
mg-tabc@yahoogroups.com [mailto:
mg-tabc@yahoogroups.com]On Behalf
Of fnitz
Sent: Wednesday, June 22, 2005 7:52 AM
To: 'mg-tabc'
Subject: RE: [mg-tabc] exhaust system
I have installed the Moss SS exhaust and am very happy with it. Don't know
about the Abingdon one.
Fred TC1353
-----Original Message-----
From:
mg-tabc@yahoogroups.com [mailto:
mg-tabc@yahoogroups.com] On Behalf Of
Jim and Shirley Mink
Sent: Wednesday, June 22, 2005 6:14 AM
To: mg-tabc
Subject: [mg-tabc] exhaust system
Does anyone have an words of wisdom regarding the Moss s/s exhaust system vs
the Abingdon Spares set up? I have used Moss for our TF and was satisfied.
Seems to be about a $200 price difference in favor of Moss. Jim
[Non-text portions of this message have been removed]
Yahoo! Groups Links
Yahoo! Groups Links
Yahoo! Groups Links
-Rick Waters
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
[Non-text portions of this message have been removed]
Re: exhaust system
Posted: Wed Jun 22, 2005 7:53 pm
by davjak@aol.com
I just purchased the Moss Falcon system and other than a slight difference
in shape of the headpipe, Which is not noticeable unless it placed next to
the rusty original. I should be installing hopefully it this weekend.
The stainless tailpipe polishes up real nice!
The only problem so far is trying to find the correct size 1 3/8? clamp to
attach the tail pipe to the muffler..
I am looking for a stainless band type clamp so when I drive the TC in the
cold snowy winters in NY I won't have to worry about rusty mufflers and
clamps!! LOL
Dave
TC 5228, TC 5041
[Non-text portions of this message have been removed]
Re: exhaust system
Posted: Fri Jun 24, 2005 7:33 pm
by ross macpherson
No experience with the Abingdon unit but have had the Moss unit on TC 3528
for seven Years (or more?) with no problems since installation. Of course I
had the same grief as everyone bolting up the head pipe to the manifold the
first time.
Cheers,
Ross
in New Westminster
-----Original Message-----
From:
mg-tabc@yahoogroups.com [mailto:
mg-tabc@yahoogroups.com]On Behalf Of
Jim and Shirley Mink
Sent: June 22, 2005 6:14 AM
To: mg-tabc
Subject: [mg-tabc] exhaust system
Does anyone have an words of wisdom regarding the Moss s/s exhaust system vs
the Abingdon Spares set up? I have used Moss for our TF and was satisfied.
Seems to be about a $200 price difference in favor of Moss. Jim
[Non-text portions of this message have been removed]
Yahoo! Groups Links
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.8.0/27 - Release Date: 6/23/05
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.8.0/27 - Release Date: 6/23/05
Re: exhaust system
Posted: Sat Jun 25, 2005 9:45 pm
by Rob & Tammy Greaves
I put on a stainless system from Abingdon..worked well. As was suggested to
me I used an MGB gasket between exhaust manifold and exhaust pipe....simple
bolt on doing that. Extremely easy and works well.
Rob Greaves
Ottawa
----- Original Message -----
From: "Ross MacPherson" arm@telus.net>
To: "Jim and Shirley Mink" mink@chilitech.com>; "mg-tabc"
mg-tabc@yahoogroups.com>
Sent: Friday, June 24, 2005 10:33 PM
Subject: RE: [mg-tabc] exhaust system
> No experience with the Abingdon unit but have had the Moss unit on TC 3528
> for seven Years (or more?) with no problems since installation. Of course
> I
> had the same grief as everyone bolting up the head pipe to the manifold
> the
> first time.
>
> Cheers,
> Ross
> in New Westminster
>
> -----Original Message-----
> From:
mg-tabc@yahoogroups.com [mailto:
mg-tabc@yahoogroups.com]On Behalf Of
> Jim and Shirley Mink
> Sent: June 22, 2005 6:14 AM
> To: mg-tabc
> Subject: [mg-tabc] exhaust system
>
>
> Does anyone have an words of wisdom regarding the Moss s/s exhaust system
> vs
> the Abingdon Spares set up? I have used Moss for our TF and was
> satisfied.
> Seems to be about a $200 price difference in favor of Moss. Jim
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.323 / Virus Database: 267.8.0/27 - Release Date: 6/23/05
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.323 / Virus Database: 267.8.0/27 - Release Date: 6/23/05
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
Re: exhaust system
Posted: Sun Jun 26, 2005 10:54 pm
by fnitz
I had absolutely no problems bolting the Moss unit up. Maybe I missed
something!
Fred TC1353
-----Original Message-----
From:
mg-tabc@yahoogroups.com [mailto:
mg-tabc@yahoogroups.com] On Behalf Of
Ross MacPherson
Sent: Friday, June 24, 2005 7:33 PM
To: Jim and Shirley Mink; mg-tabc
Subject: RE: [mg-tabc] exhaust system
No experience with the Abingdon unit but have had the Moss unit on TC 3528
for seven Years (or more?) with no problems since installation. Of course I
had the same grief as everyone bolting up the head pipe to the manifold the
first time.
Cheers,
Ross
in New Westminster
-----Original Message-----
From:
mg-tabc@yahoogroups.com [mailto:
mg-tabc@yahoogroups.com]On Behalf Of
Jim and Shirley Mink
Sent: June 22, 2005 6:14 AM
To: mg-tabc
Subject: [mg-tabc] exhaust system
Does anyone have an words of wisdom regarding the Moss s/s exhaust system vs
the Abingdon Spares set up? I have used Moss for our TF and was satisfied.
Seems to be about a $200 price difference in favor of Moss. Jim
[Non-text portions of this message have been removed]
Yahoo! Groups Links
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.8.0/27 - Release Date: 6/23/05
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.8.0/27 - Release Date: 6/23/05
Yahoo! Groups Links
exhaust system
Posted: Fri Aug 05, 2005 5:08 am
by Jim and Shirley Mink
Following the advice from many of you, I have installed a Moss/Falcon stainless steel exhaust system on the TC. It went on with no problems except for the bracket which bolts to the bell housing. That was about 1/2 inch too far to the rear and required some bending to fit. I must say that after several years of running my home made "low restriction" system (a cheap hot rod muffler with an inch and three quarter tail pipe) the new system sounds positively wimpy! Jim
[Non-text portions of this message have been removed]
Exhaust system
Posted: Sun Jan 11, 2015 11:52 am
by Jim Buell
Hi group Some time ago during a discussion of stainless steel exhaust systems I seem to remember a lister saying that there was a company that offered both a 1 inch and 1 inch system for our cars. I have been unable to find that info in the archive. If somebody has that info I would appreciate getting it. Related to that, is there a difference between the XPAG and XPEG stock exhaust manifolds. If so how do I tell the difference. I have an XPAG that has been built to 1466cc (XPEG) with a modified head that requires 1 ” SU carbs ( I have an XPEG 1 ” intake manifold) so if there is a difference in exhaust manifolds I will require the XPEG spec. one. Thanks for the help and info. Jim Buell1949 TCBlanchard, ID 83804-9546(208) 771-0087
gmparcr@lambgroupinc.net