Wilsons Sandbox

>From: "1939mgtb" 1939mgtb@comcast.net> >To: "mgtabc" mg-tabc@yahoogroups.com> >Subject: [mg-tabc] hooking ... (up a generator, what did you think?) >Date: Thu, 26 May 2005 20:42:34 -0500 > >Hi folks, >I am looking for a tach cable that has the two brush reduction box fitting >on the genny end (using a TC generator) and the "post type" TA - TB style >on the tacho end. I would prefer the original appearance. >Anyone heard of such a beast? It is my understanding that someone like >Naylor or another once made them...as usual, any lead would be appreciated. >And if anyone had one on the wall, I would LOVE to buy it. >Best, >Ray >"Morology is our profession, >our ONLY profession!" > >[Non-text portions of this message have been removed] > > > > >Yahoo! Groups Links > > > > > >

>From: "1939mgtb" 1939mgtb@comcast.net> >To: "John van den Boorn" ta1434@hotmail.com> >Subject: Re: [mg-tabc] hooking ... (up a generator, what did you think?) >Date: Tue, 31 May 2005 18:32:15 -0500 > >Might not be a bad idea, but the TB and the TA have different generators, >and I cannot find the correct TB generator just now. The TA is too long. >Thanks, though! >Best, >Ray >"Morology is our profession, >our ONLY profession!" >----- Original Message ----- From: "John van den Boorn" >ta1434@hotmail.com> >To: 1939mgtb@comcast.net> >Cc: mg-tabc@yahoogroups.com> >Sent: Tuesday, May 31, 2005 10:28 AM >Subject: RE: [mg-tabc] hooking ... (up a generator, what did you think?) > > >>Hello sir, >> >>An other alternative is to modify an original TA-generator. You can take >>away the thirth brush. >> >>>From: "1939mgtb" 1939mgtb@comcast.net> >>>To: "mgtabc" mg-tabc@yahoogroups.com> >>>Subject: [mg-tabc] hooking ... (up a generator, what did you think?) >>>Date: Thu, 26 May 2005 20:42:34 -0500 >>> >>>Hi folks, >>>I am looking for a tach cable that has the two brush reduction box >>>fitting >>>on the genny end (using a TC generator) and the "post type" TA - TB style >>>on the tacho end. I would prefer the original appearance. >>>Anyone heard of such a beast? It is my understanding that someone like >>>Naylor or another once made them...as usual, any lead would be >>>appreciated. >>>And if anyone had one on the wall, I would LOVE to buy it. >>>Best, >>>Ray >>>"Morology is our profession, >>>our ONLY profession!" >>> >>>[Non-text portions of this message have been removed] >>> >>> >>> >>> >>>Yahoo! Groups Links >>> >>> >>> >>> >>> >>> >> >>_________________________________________________________________ >>MSN Webmessenger doet het altijd en overal http://webmessenger.msn.com/ >> >> >> >> >>Yahoo! Groups Links >> >> >> >> >> >> >

----- Original Message ----- From: "John van den Boorn" ta1434@hotmail.com> To: 1939mgtb@comcast.net> Cc: mg-tabc@yahoogroups.com> Sent: Thursday, June 02, 2005 11:08 AM Subject: Re: [mg-tabc] hooking ... (up a generator, what did you think?) > Hello Ray, > > I have a TA and my father a TC, so I don't know for sure if a TB has a three > bush dynamo. > But if so, it can't be a problem to modify a three bush TB-dynamo to a two > brush. It is a simple modification, which can be remodificated to a three > bush dynamo. > > Are you sure a TA-dynamo has other dimensions than on a TB or TC? A alway's > thought on the outside only the stamped number was different. > > Greetings, John > > >From: "1939mgtb" 1939mgtb@comcast.net> > >To: "John van den Boorn" ta1434@hotmail.com> > >Subject: Re: [mg-tabc] hooking ... (up a generator, what did you think?) > >Date: Tue, 31 May 2005 18:32:15 -0500 > > > >Might not be a bad idea, but the TB and the TA have different generators, > >and I cannot find the correct TB generator just now. The TA is too long. > >Thanks, though! > >Best, > >Ray > >"Morology is our profession, > >our ONLY profession!" > >----- Original Message ----- From: "John van den Boorn" > >ta1434@hotmail.com> > >To: 1939mgtb@comcast.net> > >Cc: mg-tabc@yahoogroups.com> > >Sent: Tuesday, May 31, 2005 10:28 AM > >Subject: RE: [mg-tabc] hooking ... (up a generator, what did you think?) > > > > > >>Hello sir, > >> > >>An other alternative is to modify an original TA-generator. You can take > >>away the thirth brush. > >> > >>>From: "1939mgtb" 1939mgtb@comcast.net> > >>>To: "mgtabc" mg-tabc@yahoogroups.com> > >>>Subject: [mg-tabc] hooking ... (up a generator, what did you think?) > >>>Date: Thu, 26 May 2005 20:42:34 -0500 > >>> > >>>Hi folks, > >>>I am looking for a tach cable that has the two brush reduction box > >>>fitting > >>>on the genny end (using a TC generator) and the "post type" TA - TB style > >>>on the tacho end. I would prefer the original appearance. > >>>Anyone heard of such a beast? It is my understanding that someone like > >>>Naylor or another once made them...as usual, any lead would be > >>>appreciated. > >>>And if anyone had one on the wall, I would LOVE to buy it. > >>>Best, > >>>Ray > >>>"Morology is our profession, > >>>our ONLY profession!" > >>> > >>>[Non-text portions of this message have been removed] > >>> > >>> > >>> > >>> > >>>Yahoo! Groups Links > >>> > >>> > >>> > >>> > >>> > >>> > >> > >>_________________________________________________________________ > >>MSN Webmessenger doet het altijd en overal http://webmessenger.msn.com/ > >> > >> > >> > >> > >>Yahoo! Groups Links > >> > >> > >> > >> > >> > >> > > > > _________________________________________________________________ > MSN Webmessenger overal en altijd beschikbaar http://webmessenger.msn.com/ > > > > > Yahoo! Groups Links > > > > > >