Page 1 of 1
Re: TC Oil Filters
Posted: Fri May 13, 2005 12:40 pm
by mrbond100@earthlink.net
Could anyone please advise regarding availability of a spin-on oil filter conversion for my XPAG. I have tried the Moss canister and found that it leaks out of the bottom due to a poor o-ring design.
Much thanks,
Mike Bond
Macon, Georgia
TC 7425, TD and MGB
-----Original Message-----
From: Gene anngene@bellsouth.net>
Sent: May 12, 2005 5:01 PM
To:
mg-tabc@yahoogroups.com
Subject: [mg-tabc] Re: Hydraulic Damper Bushes
Jack asks:
"To conclude; I should like to query the group on, firstly; their
opinions as to the number of bushes required per damper, and secondly;
what their overall opinion is on the " jury-rig " fix for damper link,
bush retention."
Jack,
I only remember one bush from the damper to the link and one from the
link to the pin. I do agree with the "jury-rig" fix - works well and
lasts a long time.
Gene Gillam
Saucier, MS
Yahoo! Groups Links
Re: TC Oil Filters
Posted: Fri May 13, 2005 12:45 pm
by Narfman96 - Narfland Studio
If you need an oil filter conversion, check with Bob Grunau. His work is
impeccable.
Tom G.
----- Original Message -----
From: mrbond100@earthlink.net>
To: "Gene" anngene@bellsouth.net>; mg-tabc@yahoogroups.com>
Sent: Friday, May 13, 2005 3:39 PM
Subject: Re: [mg-tabc] Re: TC Oil Filters
> Could anyone please advise regarding availability of a spin-on oil filter
> conversion for my XPAG. I have tried the Moss canister and found that it
> leaks out of the bottom due to a poor o-ring design.
>
> Much thanks,
> Mike Bond
> Macon, Georgia
> TC 7425, TD and MGB
>
> -----Original Message-----
> From: Gene anngene@bellsouth.net>
> Sent: May 12, 2005 5:01 PM
> To:
mg-tabc@yahoogroups.com
> Subject: [mg-tabc] Re: Hydraulic Damper Bushes
>
> Jack asks:
> "To conclude; I should like to query the group on, firstly; their
> opinions as to the number of bushes required per damper, and secondly;
> what their overall opinion is on the " jury-rig " fix for damper link,
> bush retention."
>
> Jack,
>
> I only remember one bush from the damper to the link and one from the
> link to the pin. I do agree with the "jury-rig" fix - works well and
> lasts a long time.
>
> Gene Gillam
> Saucier, MS
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
Re: TC Oil Filters
Posted: Fri May 13, 2005 1:05 pm
by fnitz
Talk with Bob Grunau on the list.
grunau.garage@sympatico.ca
Fred TC1353
-----Original Message-----
From:
mg-tabc@yahoogroups.com [mailto:
mg-tabc@yahoogroups.com] On Behalf Of
mrbond100@earthlink.net
Sent: Friday, May 13, 2005 12:40 PM
To: Gene;
mg-tabc@yahoogroups.com
Subject: Re: [mg-tabc] Re: TC Oil Filters
Could anyone please advise regarding availability of a spin-on oil filter
conversion for my XPAG. I have tried the Moss canister and found that it
leaks out of the bottom due to a poor o-ring design.
Much thanks,
Mike Bond
Macon, Georgia
TC 7425, TD and MGB
-----Original Message-----
From: Gene anngene@bellsouth.net>
Sent: May 12, 2005 5:01 PM
To:
mg-tabc@yahoogroups.com
Subject: [mg-tabc] Re: Hydraulic Damper Bushes
Jack asks:
"To conclude; I should like to query the group on, firstly; their
opinions as to the number of bushes required per damper, and secondly;
what their overall opinion is on the " jury-rig " fix for damper link,
bush retention."
Jack,
I only remember one bush from the damper to the link and one from the
link to the pin. I do agree with the "jury-rig" fix - works well and
lasts a long time.
Gene Gillam
Saucier, MS
Yahoo! Groups Links
Yahoo! Groups Links
Re: TC Oil Filters
Posted: Fri May 13, 2005 1:45 pm
by John Patterson
Use Bob's adapter, it is great and truly a piece of top craftsmanship.
-----Original Message-----
From:
mg-tabc@yahoogroups.com [mailto:
mg-tabc@yahoogroups.com]On Behalf
Of fnitz
Sent: Friday, May 13, 2005 4:06 PM
To:
mrbond100@earthlink.net; 'Gene';
mg-tabc@yahoogroups.com
Subject: RE: [mg-tabc] Re: TC Oil Filters
Talk with Bob Grunau on the list.
grunau.garage@sympatico.ca
Fred TC1353
-----Original Message-----
From:
mg-tabc@yahoogroups.com [mailto:
mg-tabc@yahoogroups.com] On Behalf Of
mrbond100@earthlink.net
Sent: Friday, May 13, 2005 12:40 PM
To: Gene;
mg-tabc@yahoogroups.com
Subject: Re: [mg-tabc] Re: TC Oil Filters
Could anyone please advise regarding availability of a spin-on oil filter
conversion for my XPAG. I have tried the Moss canister and found that it
leaks out of the bottom due to a poor o-ring design.
Much thanks,
Mike Bond
Macon, Georgia
TC 7425, TD and MGB
-----Original Message-----
From: Gene anngene@bellsouth.net>
Sent: May 12, 2005 5:01 PM
To:
mg-tabc@yahoogroups.com
Subject: [mg-tabc] Re: Hydraulic Damper Bushes
Jack asks:
"To conclude; I should like to query the group on, firstly; their
opinions as to the number of bushes required per damper, and secondly;
what their overall opinion is on the " jury-rig " fix for damper link,
bush retention."
Jack,
I only remember one bush from the damper to the link and one from the
link to the pin. I do agree with the "jury-rig" fix - works well and
lasts a long time.
Gene Gillam
Saucier, MS
Yahoo! Groups Links
Yahoo! Groups Links
Yahoo! Groups Links
Re: TC Oil Filters
Posted: Fri May 13, 2005 6:56 pm
by Bob Grunau
Mike,
I can supply spin-on oil filter conversion adapters for both the TC/early TD
and late TD/TF.
Bob
Bob Grunau
150 Pinewood Trail,
Mississauga, Ontario,
Canada, L5G-2L1
905-274-4136
-----Original Message-----
From:
mg-tabc@yahoogroups.com [mailto:
mg-tabc@yahoogroups.com]On Behalf
Of
mrbond100@earthlink.net
Sent: Friday, May 13, 2005 3:40 PM
To: Gene;
mg-tabc@yahoogroups.com
Subject: Re: [mg-tabc] Re: TC Oil Filters
Could anyone please advise regarding availability of a spin-on oil filter
conversion for my XPAG. I have tried the Moss canister and found that it
leaks out of the bottom due to a poor o-ring design.
Much thanks,
Mike Bond
Macon, Georgia
TC 7425, TD and MGB
-----Original Message-----
From: Gene anngene@bellsouth.net>
Sent: May 12, 2005 5:01 PM
To:
mg-tabc@yahoogroups.com
Subject: [mg-tabc] Re: Hydraulic Damper Bushes
Jack asks:
"To conclude; I should like to query the group on, firstly; their
opinions as to the number of bushes required per damper, and secondly;
what their overall opinion is on the " jury-rig " fix for damper link,
bush retention."
Jack,
I only remember one bush from the damper to the link and one from the
link to the pin. I do agree with the "jury-rig" fix - works well and
lasts a long time.
Gene Gillam
Saucier, MS
Yahoo! Groups Links
Yahoo! Groups Links