Wilsons Sandbox

Posted: **Wed May 11, 2005 7:02 am**

I am looking for the device which holds the outer end of the starter pull Bowden cable close to the starter motor itself. I have no idea what this might be. In some pictures of TAs I have seen some sort of circular bracket attached to the steering column, in others, a device similar to the TC, a kind of triangular piece of metal extending downwards from the carburettors. Any help will be gratefully received.

Posted: **Wed May 11, 2005 7:06 am**

My TC has two Jubilee clips around the steering colum which seems to keep the bowden cable in position-probably not correct but does the job Paul TC3348

----- Original Message ----- From: "told339rig290" told339rig290@yahoo.com> To: mg-tabc@yahoogroups.com> Sent: Wednesday, May 11, 2005 3:01 PM Subject: [mg-tabc] Starter cable fixture >I am looking for the device which holds the outer end of the starter > pull Bowden cable close to the starter motor itself. I have no idea > what this might be. In some pictures of TAs I have seen some sort of > circular bracket attached to the steering column, in others, a device > similar to the TC, a kind of triangular piece of metal extending > downwards from the carburettors. > > Any help will be gratefully received. > > > > > > Yahoo! Groups Links > > > > > > >

Posted: **Wed May 11, 2005 7:32 am**

Shucks, I didn't know there was a fixing of the outer sheath of the cable. Mine works fine without one. _Peter

----- Original Message ----- From: "told339rig290" told339rig290@yahoo.com> To: mg-tabc@yahoogroups.com> Sent: Wednesday, May 11, 2005 10:01 AM Subject: [mg-tabc] Starter cable fixture >I am looking for the device which holds the outer end of the starter > pull Bowden cable close to the starter motor itself. I have no idea > what this might be. In some pictures of TAs I have seen some sort of > circular bracket attached to the steering column, in others, a device > similar to the TC, a kind of triangular piece of metal extending > downwards from the carburettors. > > Any help will be gratefully received. > > > > > > Yahoo! Groups Links > > > > > >

Posted: **Wed May 11, 2005 7:39 am**

Some cars have the triangular bracket held by the Carb bolts. They are available from the usual suspects, I believe, but make sure that you have the square cutout otherwise the jet adjusting screw is covered. It is fairly easy to make your own. Ian Thomson. -------------- --- told339rig290 told339rig290@yahoo.com> wrote:

> I am looking for the device which holds the outer > end of the starter > pull Bowden cable close to the starter motor itself. > I have no idea > what this might be. In some pictures of TAs I have > seen some sort of > circular bracket attached to the steering column, in > others, a device > similar to the TC, a kind of triangular piece of > metal extending > downwards from the carburettors. > > Any help will be gratefully received. > > > > > > Yahoo! Groups Links > > > mg-tabc-unsubscribe@yahoogroups.com > > > > >

___________________________________________________________ Yahoo! Messenger - want a free and easy way to contact your friends online? http://uk.messenger.yahoo.com

Wilsons Sandbox

Starter cable fixture

Starter cable fixture

Re: Starter cable fixture

Re: Starter cable fixture

Re: Starter cable fixture