Page 1 of 1
6 X 1mm & 8 X 1mm
Posted: Thu Apr 21, 2005 6:29 pm
by TMcNam4510@aol.com
Are the metric threads in and on the XPAG & Transmission the same as modern
metrics except for the head sizes? Thanks, Tom TC 2850
[Non-text portions of this message have been removed]
Re: 6 X 1mm & 8 X 1mm
Posted: Thu Apr 21, 2005 6:42 pm
by Bob Grunau
Tom,
Yes and no. the 8 mm x 1.0 mm pitch bolts used on the T types are modern
metric FINE. Standard modern metric is 8 x 1.25 mm pitch and not suitable.
6 mm x 1.0 mm pitch and 10mm x 1.5 mm pitch is same for T types and modern
threads.
Yes bolt heads are different but this should not stop you from using new
metric bolts. ,
Bob Grunau
-----Original Message-----
From:
mg-tabc@yahoogroups.com [mailto:
mg-tabc@yahoogroups.com]On Behalf
Of
TMcNam4510@aol.com
Sent: Thursday, April 21, 2005 9:29 PM
To:
mg-tabc@yahoogroups.com
Subject: [mg-tabc] 6 X 1mm & 8 X 1mm
Are the metric threads in and on the XPAG & Transmission the same as modern
metrics except for the head sizes? Thanks, Tom TC 2850
[Non-text portions of this message have been removed]
Yahoo! Groups Links