Page 1 of 1
TC Clutch Chatter
Posted: Wed Sep 04, 2019 6:22 pm
by David Spiegel
My TC has developed a noticeable clutch chatter while in reverse gear. No matter how delicate I am on the pedal, it still chatters. Both the clutch plate and release bearing have been replaced and have about 1000 miles on them. I would appreciate any advice. Thanks
DaveTC 6551
Sent from Yahoo Mail for iPad
Re: TC Clutch Chatter
Posted: Wed Sep 04, 2019 7:24 pm
by Gene Gillam
Good chance there s a broken rear gearbox mount (Moss Motors pt/no 410-040)...common problem and the mount can be repaired by aluminum welding.
Gene GillamSaucier, MS
Sent from my iPad
On Sep 4, 2019, at 8:02 PM, David Spiegel
de00041@yahoo.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote:
My TC has developed a noticeable clutch chatter while in reverse gear. No matter how delicate I am on the pedal, it still chatters. Both the clutch plate and release bearing have been replaced and have about 1000 miles on them. I would appreciate any advice. Thanks
DaveTC 6551
Sent from Yahoo Mail for iPad
Re: TC Clutch Chatter
Posted: Sat Sep 07, 2019 1:37 pm
by Bob Grunau
Attachments :
[*][url=file:///C:\Users\Steve\AppData\Local\PG Offline 4\Attachments\\MG Parts doc-92065.doc]MG Parts doc-92065.doc[/url]
Agreed, the TC Rear plate breaks often. Welding is OK, but add a steel re-inforcing plate behind the repaired aluminium plate to strengthen the plate. Yes I sell the kit, see attached. Thanks, Bob Bob Grunau150 Pinewood Trail,Mississauga, OntarioCanada, L5G-2L1905-274-4136 . [b]From:[/b]
mg-tabc@yahoogroups.com [mailto:
mg-tabc@yahoogroups.com] [b]On Behalf Of [/b]Gene Gillam
anngene@bellsouth.net [mg-tabc]
[b]Sent:[/b] Wednesday, September 04, 2019 10:25 PM
[b]To:[/b] David Spiegel
[b]Cc:[/b] Mg-tabc
[b]Subject:[/b] Re: [mg-tabc] TC Clutch Chatter Good chance there s a broken rear gearbox mount (Moss Motors pt/no 410-040)...common problem and the mount can be repaired by aluminum welding. Gene GillamSaucier, MSSent from my iPad
On Sep 4, 2019, at 8:02 PM, David Spiegel
de00041@yahoo.com [mg-tabc] mg-tabc-noreply@yahoogroups.com> wrote:
My TC has developed a noticeable clutch chatter while in reverse gear. No matter how delicate I am on the pedal, it still chatters. Both the clutch plate and release bearing have been replaced and have about 1000 miles on them. I would appreciate any advice. Thanks DaveTC 6551
Sent from Yahoo Mail for iPad